# Wallbe Pro

Source: https://docs.evcc.io/en/chargers/wallbe-pro

DIP switch 10 at the controller needs to be set to 'ON'. A recent controller firmware is recommended.

Supported features: mA, rfid, dim

Sponsor token required: this device is available to sponsors of the project, see https://docs.evcc.io/en/sponsorship.

## Parameters

| Name | Description | Default / example | |
| --- | --- | --- | --- |
| modbus | Modbus Type (tcpip) |  |  |
| millicurrentsupported | mA regulation supported Forces mA regulation of the extended Wallbe firmware in case autodetection fails. | false | advanced |

## Configuration example for evcc.yaml

```yaml
chargers:
    - name: my_charger
      type: template
      template: phoenix-ev-eth
      
      # Modbus TCP
      modbus: tcpip
      id: 255
      host:  # Hostname
      port: 502 # Port
      millicurrentsupported: false # mA regulation supported, Forces mA regulation of the extended Wallbe firmware in case autodetection fails. (optional)
```