# TeslaLogger

Source: https://docs.evcc.io/en/vehicles/teslalogger

Open source Tesla data logger [github.com/bassmaster187/TeslaLogger](https://github.com/bassmaster187/TeslaLogger)

## Parameters

| Name | Description | Default / example | |
| --- | --- | --- | --- |
| url | URL | http://192.0.2.2 |  |
| title | Title Will be displayed in the user interface |  |  |
| capacity | Battery capacity | 50 kWh |  |
| id | TeslaLogger CarID | 1 |  |
| port | Port | 5000 |  |
| icon | Icon Will be displayed in the user interface (car, bike, bus, moped, motorcycle, rocket, scooter, taxi, tractor, rickshaw, shuttle, van, airpurifier, battery, bulb, climate, coffeemaker, compute, cooking, cooler, desktop, device, dishwasher, dryer, floorlamp, generic, heater, heatexchange, heatpump, kettle, laundry, laundry2, machine, meter, microwave, pump, smartconsumer, tool, waterheater) | car | advanced |
| phases | Maximum number of phases Used to determine the minimum solar surplus and plan duration. (1, 2, 3) |  | advanced |
| minCurrent | Minimum current The minimum current per connected phase that can be used | 6 A | advanced |
| maxCurrent | Maximum current The maximum current per connected phase that can be used | 16 A | advanced |
| maxPower | Maximum charging power hint Defines the maximum charging power of the vehicle. Helps improve charge plan accuracy when the vehicle typically uses less than the offered current or supports higher single-phase current compared to three-phase. _The offered current of the loadpoint is not affected._ | 10000 W | advanced |
| identifiers | RFID identification Used to assign the vehicle to a loadpoint via RFID card. The identifier is shown on the loadpoint. Copy the value from there. [Learn more.](https://docs.evcc.io/en/docs/features/vehicle) |  | advanced |
| priority | Priority Priority of the loadpoint or vehicle in relation to other loadpoints or vehicles for allocating surplus energy (higher values, higher priority). |  | advanced |
| climaterdisabled | Disable climater detection Ignore the vehicle's climater state for charge control, so charging stops at the SoC or energy limit even when the vehicle signals an active climater request. |  | advanced |
| autodetectdisabled | Exclude from auto detection Ignore the vehicle for auto detection of connected vehicles |  | advanced |
| wakeupdisabled | Disable wake-up calls Do not send wake-up calls to the vehicle or charger, useful for vehicles that refuse to charge after repeated wake-ups. |  | advanced |

## Configuration example for evcc.yaml

```yaml
vehicles:
    - name: my_car
      type: template
      template: teslalogger
      url: http://192.0.2.2 # URL
      title: # Title, Will be displayed in the user interface (optional)
      capacity: 50 # Battery capacity (kWh), optional
      id: 1 # TeslaLogger CarID, optional
      port: 5000 # Port, optional
      icon: car # Icon, Will be displayed in the user interface [car, bike, bus, moped, motorcycle, rocket, scooter, taxi, tractor, rickshaw, shuttle, van, airpurifier, battery, bulb, climate, coffeemaker, compute, cooking, cooler, desktop, device, dishwasher, dryer, floorlamp, generic, heater, heatexchange, heatpump, kettle, laundry, laundry2, machine, meter, microwave, pump, smartconsumer, tool, waterheater] (optional)
      phases: # Maximum number of phases, Used to determine the minimum solar surplus and plan duration. [1, 2, 3] (optional)
      minCurrent: 6 # Minimum current (A), The minimum current per connected phase that can be used (optional)
      maxCurrent: 16 # Maximum current (A), The maximum current per connected phase that can be used (optional)
      maxPower: 10000 # Maximum charging power hint (W), Defines the maximum charging power of the vehicle. Helps improve charge plan accuracy when the vehicle typically uses less than the offered current or supports higher single-phase current compared to three-phase. _The offered current of the loadpoint is not affected._ (optional)
      identifiers: # RFID identification, Used to assign the vehicle to a loadpoint via RFID card. The identifier is shown on the loadpoint. Copy the value from there. [Learn more.](https://docs.evcc.io/en/docs/features/vehicle) (optional)
      priority: # Priority, Priority of the loadpoint or vehicle in relation to other loadpoints or vehicles for allocating surplus energy (higher values, higher priority). (optional)
      climaterdisabled: # Disable climater detection, Ignore the vehicle's climater state for charge control, so charging stops at the SoC or energy limit even when the vehicle signals an active climater request. (optional)
      autodetectdisabled: # Exclude from auto detection, Ignore the vehicle for auto detection of connected vehicles (optional)
      wakeupdisabled: # Disable wake-up calls, Do not send wake-up calls to the vehicle or charger, useful for vehicles that refuse to charge after repeated wake-ups. (optional)
```