Anker SOLIX X1 Hybrid Inverter

← PV, Battery, Grid, Meter

The Modbus TCP interface must be enabled in the Anker app. This configuration was tested with the Firmware Version 1.0.16.1. Older or newer Firmware Versions may use different register addresses and therefore deliver incorrect data.

Usage areas

Grid meter
Solar production
Battery

Parameters

Name	Description	Value	Level
`id`	Modbus ID Default: `1`	int	required
`host`	IP address or hostname Example: `192.0.2.2`		required
`port`	Port Default: `502`	int	required
`capacity` [kWh]	Battery capacity Example: `50`		optional
`minsoc` [%]	Minimum charge Lower limit when discharging the battery in normal operation Example: `25`		optional
`maxsoc` [%]	Maximum charge Upper limit when charging the battery from the grid Example: `95`		optional
`maxacpower` [W]	Maximum AC power of the hybrid inverter Default: `0` Example: `5000`		advanced
`maxchargepower` [W]	Maximum charge power For forced charging of the battery.		advanced
`maxdischargepower` [W]	Maximum discharge power Maximum discharge power of the storage.		advanced

Configuration example for evcc.yaml

If you don't want to configure via the UI, you can alternatively use this YAML block.

Grid meterSolar productionBattery

meters:
    - name: my_grid
      type: template
      template: anker-solix-x1
      usage: grid

      # Modbus TCP
      modbus: tcpip
      id: 1
      host:  # Hostname
      port: 502 # Port

meters:
    - name: my_pv
      type: template
      template: anker-solix-x1
      usage: pv

      # Modbus TCP
      modbus: tcpip
      id: 1
      host:  # Hostname
      port: 502 # Port
      maxacpower: 0 # Maximum AC power of the hybrid inverter (W), optional

meters:
    - name: my_battery
      type: template
      template: anker-solix-x1
      usage: battery

      # Modbus TCP
      modbus: tcpip
      id: 1
      host:  # Hostname
      port: 502 # Port
      capacity: 50 # Battery capacity (kWh), optional
      minsoc: 25 # Minimum charge (%), Lower limit when discharging the battery in normal operation (optional)
      maxsoc: 95 # Maximum charge (%), Upper limit when charging the battery from the grid (optional)
      maxchargepower: # Maximum charge power (W), For forced charging of the battery. (optional)
      maxdischargepower: # Maximum discharge power (W), Maximum discharge power of the storage. (optional)