Audi Wallbox plus

← Chargers No sponsor token required

This page shows the nightly version. Switch to the release version.

The device has to have a fix IP address (manuall or via DHCP).

The identification of a vehicle using the RFID card is not possible.

Important: A mostly flawless functionality can only be provided with an external energy meter and no usage of CT coils, due to sosftware bugs of the Wallbox. Using a LAN connection is highly recommended.

Note: If you've added an energy meter to your charger please use the Pro or Connected+ integration.

Supported features

• mA regulation: Finer charging current regulation (mA instead of A) for better solar surplus use.
• Dimmable: Power consumption can be reduced (e.g. §14a EnWG). See External Control.

Parameters

Name	Description	Value	Level
ski	Subject Key Identifier (SKI) Usually found on the web interface of the wallbox		optional
ip	IP address Example: 192.0.2.2		optional

Configuration example for evcc.yaml

If you don't want to configure via the UI, you can alternatively use this YAML block.

chargers:
    - name: my_charger
      type: template
      template: elliconnect
      ski: # Subject Key Identifier (SKI), Usually found on the web interface of the wallbox
      ip: 192.0.2.2 # IP address, optional