Vestel Connect Plus

← Chargers

This page shows the nightly version. Switch to the release version.

1P3P requires at least firmware version 3.187.0, RFID at least 3.156.0.

Supported features

• RFID: Integrated RFID card reader for vehicle identification.
• 1P/3P: Automatic phase switching. Useful for solar surplus charging.
• Built-in meter: Support for an integrated meter.
• Dimmable: Power consumption can be reduced (e.g. §14a EnWG). See External Control.

💚 Sponsor token required

This device is available to sponsors of the project. Read more about our sponsorship model.

Parameters

Name	Description	Value	Level
id	Modbus ID Default: 1	int	required
host	IP address or hostname Example: 192.0.2.2		required
port	Port Default: 502	int	required

Configuration example for evcc.yaml

If you don't want to configure via the UI, you can alternatively use this YAML block.

chargers:
    - name: my_charger
      type: template
      template: vestel

      # Modbus TCP
      modbus: tcpip
      id: 255
      host:  # Hostname
      port: 502 # Port