Wallbe Eco 2.0(s)

← Chargers

This page shows the nightly version. Switch to the release version.

DIP switch 10 at the controller needs to be set to 'ON'. A recent controller firmware is recommended.

Supported features

• mA regulation: Finer charging current regulation (mA instead of A) for better solar surplus use.
• RFID: Integrated RFID card reader for vehicle identification.
• Dimmable: Power consumption can be reduced (e.g. § 14a EnWG). See External Limit.

💚 Sponsor token required

This device is available to sponsors of the project. Read more about our sponsorship model.

Parameters

Name	Description	Value	Level
id	Modbus ID Default: 1	int	required
host	IP address or hostname Example: 192.0.2.2		required
port	Port Default: 502	int	required
millicurrentsupported	mA regulation supported Forces mA regulation of the extended Wallbe firmware in case autodetection fails. Default: false		advanced

Configuration example for evcc.yaml

If you don't want to configure via the UI, you can alternatively use this YAML block.

chargers:
    - name: my_charger
      type: template
      template: phoenix-ev-eth

      # Modbus TCP
      modbus: tcpip
      id: 255
      host:  # Hostname
      port: 502 # Port
      millicurrentsupported: false # mA regulation supported, Forces mA regulation of the extended Wallbe firmware in case autodetection fails. (optional)