Kostal Plenticore Hybrid

← PV, Battery, Grid, Meter

Compatible with various inverter generations (G1/G2/G3). For active battery control, the feature external battery control via Modbus must be activated using installer access.

Supported features

Battery control: External control of home battery charging and discharging via evcc.
Curtailable: Inverter production can be reduced (e.g. § 9 EEG). See External Limit.

Usage areas

Solar production
Battery

Parameters

Name	Description	Value	Level
`id`	Modbus ID Default: `1`	int	required
`host`	IP address or hostname Example: `192.0.2.2`		required
`port`	Port Default: `502`	int	required
`capacity` [kWh]	Battery capacity Example: `50`		optional
`minsoc` [%]	Minimum charge Lower limit as configured on the battery system. Used by optimizer. Default: `0` Example: `25`		optional
`maxsoc` [%]	Maximum charge Upper limit as configured on the battery system. Used by optimizer and, on some devices, for grid charging. Default: `100` Example: `95`		optional
`endianness`	Endianness (Little/Big) Default: `little`		advanced
`maxacpower` [W]	Maximum AC power of the hybrid inverter Default: `0` Example: `5000`		advanced
`maxchargepower` [W]	Maximum charge power Highest power the battery system can charge with. The optimizer plans with charging up to this power. Some devices also use it as grid charging power.		advanced
`maxdischargepower` [W]	Maximum discharge power Highest power the battery system can discharge with. The optimizer plans with discharging up to this power. Smart mode assumes the battery supplies at most this power to vehicle charging.		advanced
`watchdog`	Watchdog Default: `60s`		advanced

Configuration example for evcc.yaml

If you don't want to configure via the UI, you can alternatively use this YAML block.

Solar productionBattery

meters:
    - name: my_pv
      type: template
      template: kostal-plenticore-gen2
      usage: pv

      # Modbus TCP
      modbus: tcpip
      id: 71
      host:  # Hostname
      port: 1502 # Port
      endianness: little # Endianness (Little/Big), [little, big] (optional)
      maxacpower: 0 # Maximum AC power of the hybrid inverter (W), optional
      watchdog: 60s # Watchdog, optional

meters:
    - name: my_battery
      type: template
      template: kostal-plenticore-gen2
      usage: battery

      # Modbus TCP
      modbus: tcpip
      id: 71
      host:  # Hostname
      port: 1502 # Port
      capacity: 50 # Battery capacity (kWh), optional
      minsoc: 0 # Minimum charge (%), Lower limit as configured on the battery system. Used by optimizer. (optional)
      maxsoc: 100 # Maximum charge (%), Upper limit as configured on the battery system. Used by optimizer and, on some devices, for grid charging. (optional)
      endianness: little # Endianness (Little/Big), [little, big] (optional)
      maxchargepower: # Maximum charge power (W), Highest power the battery system can charge with. The optimizer plans with charging up to this power. Some devices also use it as grid charging power. (optional)
      maxdischargepower: # Maximum discharge power (W), Highest power the battery system can discharge with. The optimizer plans with discharging up to this power. Smart mode assumes the battery supplies at most this power to vehicle charging. (optional)
      watchdog: 60s # Watchdog, optional