Kostal Smart Energy Meter (via inverter)

← PV, Battery, Grid, Meter

This page shows the nightly version. Switch to the release version.

The energy meter must be installed in sensor position 2 (grid connection). Sensor position 1 (House consumption) is not supported.

Usage areas

• Grid meter

Parameters

Name	Description	Value	Level
id	Modbus ID Default: 1	int	required
host	IP address or hostname Example: 192.0.2.2		required
port	Port Default: 502	int	required

Configuration example for evcc.yaml

If you don't want to configure via the UI, you can alternatively use this YAML block.

meters:
    - name: my_grid
      type: template
      template: kostal-ksem-inverter
      usage: grid

      # Modbus TCP
      modbus: tcpip
      id: 71
      host:  # Hostname
      port: 1502 # Port