Zendure Solarflow AC / Pro

← PV, Battery, Grid, Meter

This page shows the nightly version. Switch to the release version.

For active battery control, the local API must be enabled via the Zendure App (add HEMS and then exit to apply). The device serial number can be found in the Zendure App in the device settings. For forced discharge to grid, Energy Export must also be enabled in the Zendure App.

Supported features

• Battery control: External control of home battery charging and discharging via evcc.

Usage areas

• Battery

Parameters

Name	Description	Value	Level
host	IP address or hostname Example: 192.0.2.2		optional
serial	Serial Required only for active battery control. Device serial number (can be found in the Zendure App) Example: WOB1NHMAMXXXXX3		optional
capacity [kWh]	Battery capacity Example: 50		optional
cache	Cache Time interval for data refresh Default: 1s Example: 5m		advanced

Configuration example for evcc.yaml

If you don't want to configure via the UI, you can alternatively use this YAML block.

meters:
    - name: my_battery
      type: template
      template: zendure-solarflow-battery
      usage: battery
      host: 192.0.2.2 # IP address or hostname
      serial: WOB1NHMAMXXXXX3 # Serial, Required only for active battery control. Device serial number (can be found in the Zendure App) (optional)
      capacity: 50 # Battery capacity (kWh), optional
      cache: 1s # Cache, Time interval for data refresh (optional)