Solvis SolvisControl 2/3

← Heating

Modbus TCP must be enabled at the SolvisControl under "Settings / Network". Control is done via the hot water target temperature. The controller does not support power reduction (dim).

Supported features

Built-in meter: Support for an integrated meter.

Parameters

Name	Description	Level
`host`	IP address or hostname Example: `192.0.2.2`	optional
`tempsource`	Temperature source Default: `warmwater`	optional
`port`	Port Default: `502`	optional
`tempnormal`	Target temperature normal mode Default: `48`	optional
`tempboost`	Target temperature boost Default: `60`	optional

Configuration example for evcc.yaml

If you don't want to configure via the UI, you can alternatively use this YAML block.

chargers:
    - name: my_heating
      type: template
      template: solvis
      host: 192.0.2.2 # IP address or hostname
      tempsource: warmwater # Temperature source, [warmwater, buffer]
      port: 502 # Port, optional
      tempnormal: 48 # Target temperature normal mode, optional
      tempboost: 60 # Target temperature boost, optional