Solvis SolvisControl 2/3

← Heating

This page shows the nightly version. Switch to the release version.

Modbus TCP must be enabled at the SolvisControl under "Settings / Network". Control is done via the hot water target temperature. The controller does not support power reduction (dim).

Supported features

• Built-in meter: Support for an integrated meter.

Parameters

Name	Description	Value	Level
id	Modbus ID Default: 1	int	required
host	IP address or hostname Example: 192.0.2.2		required
port	Port Default: 502	int	required
tempsource	Temperature source Default: warmwater	warmwaterbuffer	optional
tempnormal	Target temperature normal mode Default: 48		optional
tempboost	Target temperature boost Default: 60		optional

Configuration example for evcc.yaml

If you don't want to configure via the UI, you can alternatively use this YAML block.

chargers:
    - name: my_heating
      type: template
      template: solvis

      # Modbus TCP
      modbus: tcpip
      id: 1
      host:  # Hostname
      port: 502 # Port
      tempsource: warmwater # Temperature source, [warmwater, buffer]
      tempnormal: 48 # Target temperature normal mode, optional
      tempboost: 60 # Target temperature boost, optional