Přeskočit na obsah
chytré nabíjení

Shelly Plus i4 DC

Connect the relay contacts of the control box to the inputs SW1 to SW4. All used inputs must be configured as input type "switch" in the Shelly app or web interface, not as "button".

Parametry

NázevPopisHodnotaÚroveň
hostIP address or hostname
Příklad: 192.0.2.2
volitelné
maxconsumptionpower [W]Guaranteed minimum power (Pmin)

Power limit applied to the root circuit while the limit is active.

volitelné
w4inputW4 input

Input number for the W4 signal (Dimmer for controllable loads), 1 to 4 (SW1 = 1)

Výchozí: 1
volitelné
w3inputW3 input

Input number for the W3 signal (Zero export, 0%), 1 to 4 (SW1 = 1)

Výchozí: 2
volitelné
passwordPassword

Only required if authentication is enabled on the device (user is always admin)

volitelné
productionnominalmax [Wp]Installed generator power

Rated generator/module power of the installation (reference value according to § 9 EEG).

volitelné
s1inputS1 input

Input number for the S1 signal (60% export power limit), 1 to 4 (SW1 = 1)

Příklad: 3
volitelné
s2inputS2 input

Input number for the S2 signal (30% export power limit), 1 to 4 (SW1 = 1)

Příklad: 4
volitelné
Příklad konfigurace pro evcc.yaml

Pokud nechcete konfigurovat přes uživatelské rozhraní, můžete místo toho použít tento blok YAML.

hems:
type: template
template: fnn-shelly-i4
host: 192.0.2.2 # IP address or hostname
maxconsumptionpower: # Guaranteed minimum power (Pmin) (W), Power limit applied to the root circuit while the limit is active.
w4input: 1 # W4 input, Input number for the W4 signal (Dimmer for controllable loads), 1 to 4 (SW1 = 1)
w3input: 2 # W3 input, Input number for the W3 signal (Zero export, 0%), 1 to 4 (SW1 = 1)
password: # Password, Only required if authentication is enabled on the device (user is always admin) (optional)
productionnominalmax: # Installed generator power (Wp), Rated generator/module power of the installation (reference value according to § 9 EEG). (optional)
s1input: 3 # S1 input, Input number for the S1 signal (60% export power limit), 1 to 4 (SW1 = 1) (optional)
s2input: 4 # S2 input, Input number for the S2 signal (30% export power limit), 1 to 4 (SW1 = 1) (optional)