Home Assistant

← Solár, baterie, síť, měřiče

Home Assistant instances in your network will be auto-discovered and suitable entities (e.g. sensor.*) will be suggested.

Oblasti využití

Měřič sítě
Solární výroba
Baterie
Měřič nabíječky
Chytrý spotřebič

Parametry

Název	Popis	Úroveň
`uri`	Home Assistant URI Příklad: `http://homeassistant.local:8123`	volitelné
`power`	Power Entity Entity ID for instantaneous power measurement in watts. The entity must provide numeric values only (e.g., "1234", not "1234 W"). Příklad: `sensor.house_power`	volitelné
`capacity` [kWh]	Battery capacity Příklad: `50`	volitelné
`minsoc` [%]	Minimum charge Lower limit as configured on the battery system. Used by optimizer. Výchozí: `0` Příklad: `25`	volitelné
`maxsoc` [%]	Maximum charge Upper limit as configured on the battery system. Used by optimizer and for grid charging. Výchozí: `100` Příklad: `95`	volitelné
`energy`	Energy Entity Entity ID for total energy in kWh (e.g. grid import or battery charging). No daily or interval values. Příklad: `sensor.house_energy`	pokročilé
`returnEnergy`	Return Energy Entity Entity ID for total energy in reverse direction in kWh (e.g. grid export or battery discharging). No daily or interval values. Příklad: `sensor.house_return_energy`	pokročilé
`currentL1`	L1 Current Entity Entity ID for L1 current measurement in amperes Příklad: `sensor.house_current_l1`	pokročilé
`currentL2`	L2 Current Entity Entity ID for L2 current measurement in amperes Příklad: `sensor.house_current_l2`	pokročilé
`currentL3`	L3 Current Entity Entity ID for L3 current measurement in amperes Příklad: `sensor.house_current_l3`	pokročilé
`voltageL1`	L1 Voltage Entity Entity ID for L1 voltage measurement in volts Příklad: `sensor.house_voltage_l1`	pokročilé
`voltageL2`	L2 Voltage Entity Entity ID for L2 voltage measurement in volts Příklad: `sensor.house_voltage_l2`	pokročilé
`voltageL3`	L3 Voltage Entity Entity ID for L3 voltage measurement in volts Příklad: `sensor.house_voltage_l3`	pokročilé
`soc`	Battery State of Charge Entity ID for battery state of charge in percent Příklad: `sensor.battery_soc`	pokročilé
`modeNormal`	Normal Mode Script Script to put home battery to normal operation. Required when any other mode script is set. The script is responsible for any necessary state changes on the HA side. Příklad: `script.battery_normal`	pokročilé
`modeHold`	Hold Mode Script Optional script to prevent the home battery from discharging. Příklad: `script.battery_hold`	pokročilé
`modeCharge`	Grid Charge Mode Script Optional script to grid-charge the home battery. Příklad: `script.battery_grid_charge`	pokročilé
`minSocEntity`	Minimum SoC Entity Optional entity ID providing the minimum battery state of charge in percent. Overrides the static minimum SoC value. Příklad: `number.battery_min_soc`	pokročilé
`maxSocEntity`	Maximum SoC Entity Optional entity ID providing the maximum battery state of charge in percent. Overrides the static maximum SoC value. Příklad: `number.battery_max_soc`	pokročilé
`modeHoldCharge`	Hold Charge Mode Script Optional script to prevent the home battery from charging while discharging to cover the house load remains allowed. Příklad: `script.battery_hold_charge`	pokročilé
`modeDischarge`	Grid Discharge Mode Script Optional script to force-discharge the home battery to the grid. Příklad: `script.battery_grid_discharge`	pokročilé
`insecure`	Accept self-signed certificates	pokročilé
`maxacpower` [W]	Maximum AC power of the hybrid inverter Výchozí: `0` Příklad: `5000`	pokročilé
`maxchargepower` [W]	Maximum charge power For forced charging of the battery.	pokročilé
`maxdischargepower` [W]	Maximum discharge power Maximum discharge power of the storage.	pokročilé

Příklad konfigurace pro evcc.yaml

Pokud nechcete konfigurovat přes uživatelské rozhraní, můžete místo toho použít tento blok YAML.

Měřič sítěSolární výrobaBaterieChytrý spotřebičMěřič nabíječky

meters:
    - name: my_grid
      type: template
      template: homeassistant
      usage: grid
      uri: http://homeassistant.local:8123 # Home Assistant URI
      power: sensor.house_power # Power Entity, Entity ID for instantaneous power measurement in watts. The entity must provide numeric values only (e.g., "1234", not "1234 W").
      energy: sensor.house_energy # Energy Entity, Entity ID for total energy in kWh (e.g. grid import or battery charging). No daily or interval values. (optional)
      returnEnergy: sensor.house_return_energy # Return Energy Entity, Entity ID for total energy in reverse direction in kWh (e.g. grid export or battery discharging). No daily or interval values. (optional)
      currentL1: sensor.house_current_l1 # L1 Current Entity, Entity ID for L1 current measurement in amperes (optional)
      currentL2: sensor.house_current_l2 # L2 Current Entity, Entity ID for L2 current measurement in amperes (optional)
      currentL3: sensor.house_current_l3 # L3 Current Entity, Entity ID for L3 current measurement in amperes (optional)
      voltageL1: sensor.house_voltage_l1 # L1 Voltage Entity, Entity ID for L1 voltage measurement in volts (optional)
      voltageL2: sensor.house_voltage_l2 # L2 Voltage Entity, Entity ID for L2 voltage measurement in volts (optional)
      voltageL3: sensor.house_voltage_l3 # L3 Voltage Entity, Entity ID for L3 voltage measurement in volts (optional)
      insecure: # Accept self-signed certificates, optional

meters:
    - name: my_pv
      type: template
      template: homeassistant
      usage: pv
      uri: http://homeassistant.local:8123 # Home Assistant URI
      power: sensor.house_power # Power Entity, Entity ID for instantaneous power measurement in watts. The entity must provide numeric values only (e.g., "1234", not "1234 W").
      energy: sensor.house_energy # Energy Entity, Entity ID for total energy in kWh (e.g. grid import or battery charging). No daily or interval values. (optional)
      returnEnergy: sensor.house_return_energy # Return Energy Entity, Entity ID for total energy in reverse direction in kWh (e.g. grid export or battery discharging). No daily or interval values. (optional)
      currentL1: sensor.house_current_l1 # L1 Current Entity, Entity ID for L1 current measurement in amperes (optional)
      currentL2: sensor.house_current_l2 # L2 Current Entity, Entity ID for L2 current measurement in amperes (optional)
      currentL3: sensor.house_current_l3 # L3 Current Entity, Entity ID for L3 current measurement in amperes (optional)
      voltageL1: sensor.house_voltage_l1 # L1 Voltage Entity, Entity ID for L1 voltage measurement in volts (optional)
      voltageL2: sensor.house_voltage_l2 # L2 Voltage Entity, Entity ID for L2 voltage measurement in volts (optional)
      voltageL3: sensor.house_voltage_l3 # L3 Voltage Entity, Entity ID for L3 voltage measurement in volts (optional)
      insecure: # Accept self-signed certificates, optional
      maxacpower: 0 # Maximum AC power of the hybrid inverter (W), optional

meters:
    - name: my_battery
      type: template
      template: homeassistant
      usage: battery
      uri: http://homeassistant.local:8123 # Home Assistant URI
      power: sensor.house_power # Power Entity, Entity ID for instantaneous power measurement in watts. The entity must provide numeric values only (e.g., "1234", not "1234 W").
      capacity: 50 # Battery capacity (kWh), optional
      minsoc: 0 # Minimum charge (%), Lower limit as configured on the battery system. Used by optimizer. (optional)
      maxsoc: 100 # Maximum charge (%), Upper limit as configured on the battery system. Used by optimizer and for grid charging. (optional)
      energy: sensor.house_energy # Energy Entity, Entity ID for total energy in kWh (e.g. grid import or battery charging). No daily or interval values. (optional)
      returnEnergy: sensor.house_return_energy # Return Energy Entity, Entity ID for total energy in reverse direction in kWh (e.g. grid export or battery discharging). No daily or interval values. (optional)
      currentL1: sensor.house_current_l1 # L1 Current Entity, Entity ID for L1 current measurement in amperes (optional)
      currentL2: sensor.house_current_l2 # L2 Current Entity, Entity ID for L2 current measurement in amperes (optional)
      currentL3: sensor.house_current_l3 # L3 Current Entity, Entity ID for L3 current measurement in amperes (optional)
      voltageL1: sensor.house_voltage_l1 # L1 Voltage Entity, Entity ID for L1 voltage measurement in volts (optional)
      voltageL2: sensor.house_voltage_l2 # L2 Voltage Entity, Entity ID for L2 voltage measurement in volts (optional)
      voltageL3: sensor.house_voltage_l3 # L3 Voltage Entity, Entity ID for L3 voltage measurement in volts (optional)
      soc: sensor.battery_soc # Battery State of Charge, Entity ID for battery state of charge in percent (optional)
      modeNormal: script.battery_normal # Normal Mode Script, Script to put home battery to normal operation. Required when any other mode script is set. The script is responsible for any necessary state changes on the HA side. (optional)
      modeHold: script.battery_hold # Hold Mode Script, Optional script to prevent the home battery from discharging. (optional)
      modeCharge: script.battery_grid_charge # Grid Charge Mode Script, Optional script to grid-charge the home battery. (optional)
      minSocEntity: number.battery_min_soc # Minimum SoC Entity, Optional entity ID providing the minimum battery state of charge in percent. Overrides the static minimum SoC value. (optional)
      maxSocEntity: number.battery_max_soc # Maximum SoC Entity, Optional entity ID providing the maximum battery state of charge in percent. Overrides the static maximum SoC value. (optional)
      modeHoldCharge: script.battery_hold_charge # Hold Charge Mode Script, Optional script to prevent the home battery from charging while discharging to cover the house load remains allowed. (optional)
      modeDischarge: script.battery_grid_discharge # Grid Discharge Mode Script, Optional script to force-discharge the home battery to the grid. (optional)
      insecure: # Accept self-signed certificates, optional
      maxchargepower: # Maximum charge power (W), For forced charging of the battery. (optional)
      maxdischargepower: # Maximum discharge power (W), Maximum discharge power of the storage. (optional)

meters:
    - name: my_aux
      type: template
      template: homeassistant
      usage: aux
      uri: http://homeassistant.local:8123 # Home Assistant URI
      power: sensor.house_power # Power Entity, Entity ID for instantaneous power measurement in watts. The entity must provide numeric values only (e.g., "1234", not "1234 W").
      energy: sensor.house_energy # Energy Entity, Entity ID for total energy in kWh (e.g. grid import or battery charging). No daily or interval values. (optional)
      returnEnergy: sensor.house_return_energy # Return Energy Entity, Entity ID for total energy in reverse direction in kWh (e.g. grid export or battery discharging). No daily or interval values. (optional)
      currentL1: sensor.house_current_l1 # L1 Current Entity, Entity ID for L1 current measurement in amperes (optional)
      currentL2: sensor.house_current_l2 # L2 Current Entity, Entity ID for L2 current measurement in amperes (optional)
      currentL3: sensor.house_current_l3 # L3 Current Entity, Entity ID for L3 current measurement in amperes (optional)
      voltageL1: sensor.house_voltage_l1 # L1 Voltage Entity, Entity ID for L1 voltage measurement in volts (optional)
      voltageL2: sensor.house_voltage_l2 # L2 Voltage Entity, Entity ID for L2 voltage measurement in volts (optional)
      voltageL3: sensor.house_voltage_l3 # L3 Voltage Entity, Entity ID for L3 voltage measurement in volts (optional)
      insecure: # Accept self-signed certificates, optional

meters:
    - name: my_charger
      type: template
      template: homeassistant
      usage: charge
      uri: http://homeassistant.local:8123 # Home Assistant URI
      power: sensor.house_power # Power Entity, Entity ID for instantaneous power measurement in watts. The entity must provide numeric values only (e.g., "1234", not "1234 W").
      energy: sensor.house_energy # Energy Entity, Entity ID for total energy in kWh (e.g. grid import or battery charging). No daily or interval values. (optional)
      returnEnergy: sensor.house_return_energy # Return Energy Entity, Entity ID for total energy in reverse direction in kWh (e.g. grid export or battery discharging). No daily or interval values. (optional)
      currentL1: sensor.house_current_l1 # L1 Current Entity, Entity ID for L1 current measurement in amperes (optional)
      currentL2: sensor.house_current_l2 # L2 Current Entity, Entity ID for L2 current measurement in amperes (optional)
      currentL3: sensor.house_current_l3 # L3 Current Entity, Entity ID for L3 current measurement in amperes (optional)
      voltageL1: sensor.house_voltage_l1 # L1 Voltage Entity, Entity ID for L1 voltage measurement in volts (optional)
      voltageL2: sensor.house_voltage_l2 # L2 Voltage Entity, Entity ID for L2 voltage measurement in volts (optional)
      voltageL3: sensor.house_voltage_l3 # L3 Voltage Entity, Entity ID for L3 voltage measurement in volts (optional)
      insecure: # Accept self-signed certificates, optional

Zobrazit verzi nightly