IoTaWatt Energy Monitor

← Solár, baterie, síť, měřiče

Requires an IoTaWatt device accessible on the local network. Find available series names on the IoTaWatt status page (http://<device-host>). For single-phase setups, configure only the main series (e.g. GridNet, Solar). For three-phase, configure one series per phase (e.g. Grid_A, Grid_B, Grid_C).

Oblasti využití

Měřič sítě
Solární výroba
Měřič nabíječky

Parametry

Název	Popis	Úroveň
`host`	IP address or hostname Příklad: `192.0.2.2`	volitelné
`series`	L1 / single-phase series IoTaWatt series name (Watts). Check the IoTaWatt status page for available series. Příklad: `GridNet`	volitelné
`seriesL2`	L2 series (three-phase) Series name for phase L2. Leave empty for single-phase.	pokročilé
`seriesL3`	L3 series (three-phase) Series name for phase L3. Leave empty for single-phase.	pokročilé
`cache`	Cache Time interval for data refresh Výchozí: `2s` Příklad: `5m`	pokročilé

Příklad konfigurace pro evcc.yaml

Pokud nechcete konfigurovat přes uživatelské rozhraní, můžete místo toho použít tento blok YAML.

Měřič sítěSolární výrobaMěřič nabíječky

meters:
    - name: my_grid
      type: template
      template: iotawatt
      usage: grid
      host: 192.0.2.2 # IP address or hostname
      series: GridNet # L1 / single-phase series, IoTaWatt series name (Watts). Check the IoTaWatt status page for available series.
      seriesL2: # L2 series (three-phase), Series name for phase L2. Leave empty for single-phase. (optional)
      seriesL3: # L3 series (three-phase), Series name for phase L3. Leave empty for single-phase. (optional)
      cache: 2s # Cache, Time interval for data refresh (optional)

meters:
    - name: my_pv
      type: template
      template: iotawatt
      usage: pv
      host: 192.0.2.2 # IP address or hostname
      series: GridNet # L1 / single-phase series, IoTaWatt series name (Watts). Check the IoTaWatt status page for available series.
      seriesL2: # L2 series (three-phase), Series name for phase L2. Leave empty for single-phase. (optional)
      seriesL3: # L3 series (three-phase), Series name for phase L3. Leave empty for single-phase. (optional)
      cache: 2s # Cache, Time interval for data refresh (optional)

meters:
    - name: my_charger
      type: template
      template: iotawatt
      usage: charge
      host: 192.0.2.2 # IP address or hostname
      series: GridNet # L1 / single-phase series, IoTaWatt series name (Watts). Check the IoTaWatt status page for available series.
      seriesL2: # L2 series (three-phase), Series name for phase L2. Leave empty for single-phase. (optional)
      seriesL3: # L3 series (three-phase), Series name for phase L3. Leave empty for single-phase. (optional)
      cache: 2s # Cache, Time interval for data refresh (optional)