A-Tronix AX Plus Hybrid Inverter

Podporované funkce

Řízení baterie: Externí řízení nabíjení a vybíjení domácí baterie pomocí evcc.

Oblasti využití

Měřič sítě
Solární výroba
Baterie

Parametry

Modbus

Název	Popis	Hodnota	Úroveň
`id`	Modbus ID Výchozí: `1`	int	povinné
`device`	Název zařízení Adaptér USB-RS485 Příklad: `/dev/ttyUSB0`		povinné
`baudrate`	Přenosová rychlost Výchozí: `9600`		povinné
`comset`	ComSet Komunikační parametr adaptéru Výchozí: `8N1`		povinné
`host`	IP adresa nebo název hostitele Příklad: `192.0.2.2`		povinné
`port`	Port Výchozí: `502`	int	povinné
`maxchargepower` [W]	Maximum charge power Highest power the battery system can charge with. The optimizer plans with charging up to this power. Some devices also use it as grid charging power.		volitelné
`maxdischargecurrent`	Max Discharge Current Battery max discharge current in A, written back when leaving hold mode. Inverter default is 50 A for H3-Pro/Smart (26 A for H3).		volitelné
`capacity` [kWh]	Battery capacity Příklad: `50`		volitelné
`minsoc` [%]	Minimum charge Lower limit as configured on the battery system. Used by optimizer. Výchozí: `10` Příklad: `25`		volitelné
`maxsoc` [%]	Maximum charge Upper limit as configured on the battery system. Used by optimizer and, on some devices, for grid charging. Výchozí: `100` Příklad: `95`		volitelné
`maxchargecurrent`	Max Charge Current Battery max charge current in A, written back when leaving holdcharge mode. Inverter default is 50 A for H3-Pro/Smart. Výchozí: `50`		volitelné
`maxacpower` [W]	Maximum AC power of the hybrid inverter Výchozí: `0` Příklad: `5000`		pokročilé
`maxdischargepower` [W]	Maximum discharge power Highest power the battery system can discharge with. The optimizer plans with discharging up to this power. Smart mode assumes the battery supplies at most this power to vehicle charging.		pokročilé

Příklad konfigurace pro evcc.yaml

Pokud nechcete konfigurovat přes uživatelské rozhraní, můžete místo toho použít tento blok YAML.

Měřič sítěSolární výrobaBaterie

meters:
    - name: my_grid
      type: template
      template: fox-ess-h3-smart
      usage: grid

      # RS485 via adapter (Modbus RTU)
      modbus: rs485serial
      id: 247
      device: /dev/ttyUSB0 # USB-RS485 Adapter Adresse
      baudrate: 9600 # Prüfe die Geräteeinstellungen, typische Werte sind 9600, 19200, 38400, 57600, 115200
      comset: "8N1" # Kommunikationsparameter für den Adapter

      # RS485 via TCP/IP (Modbus RTU)
      modbus: rs485tcpip
      id: 247
      host:  # Hostname
      port: 502 # Port

      # Modbus TCP
      modbus: tcpip
      id: 247
      host:  # Hostname
      port: 502 # Port
      maxdischargecurrent: # Max Discharge Current, Battery max discharge current in A, written back when leaving hold mode. Inverter default is 50 A for H3-Pro/Smart (26 A for H3).
      maxchargecurrent: 50 # Max Charge Current, Battery max charge current in A, written back when leaving holdcharge mode. Inverter default is 50 A for H3-Pro/Smart. (optional)

meters:
    - name: my_pv
      type: template
      template: fox-ess-h3-smart
      usage: pv

      # RS485 via adapter (Modbus RTU)
      modbus: rs485serial
      id: 247
      device: /dev/ttyUSB0 # USB-RS485 Adapter Adresse
      baudrate: 9600 # Prüfe die Geräteeinstellungen, typische Werte sind 9600, 19200, 38400, 57600, 115200
      comset: "8N1" # Kommunikationsparameter für den Adapter

      # RS485 via TCP/IP (Modbus RTU)
      modbus: rs485tcpip
      id: 247
      host:  # Hostname
      port: 502 # Port

      # Modbus TCP
      modbus: tcpip
      id: 247
      host:  # Hostname
      port: 502 # Port
      maxdischargecurrent: # Max Discharge Current, Battery max discharge current in A, written back when leaving hold mode. Inverter default is 50 A for H3-Pro/Smart (26 A for H3).
      maxchargecurrent: 50 # Max Charge Current, Battery max charge current in A, written back when leaving holdcharge mode. Inverter default is 50 A for H3-Pro/Smart. (optional)
      maxacpower: 0 # Maximum AC power of the hybrid inverter (W), optional

meters:
    - name: my_battery
      type: template
      template: fox-ess-h3-smart
      usage: battery

      # RS485 via adapter (Modbus RTU)
      modbus: rs485serial
      id: 247
      device: /dev/ttyUSB0 # USB-RS485 Adapter Adresse
      baudrate: 9600 # Prüfe die Geräteeinstellungen, typische Werte sind 9600, 19200, 38400, 57600, 115200
      comset: "8N1" # Kommunikationsparameter für den Adapter

      # RS485 via TCP/IP (Modbus RTU)
      modbus: rs485tcpip
      id: 247
      host:  # Hostname
      port: 502 # Port

      # Modbus TCP
      modbus: tcpip
      id: 247
      host:  # Hostname
      port: 502 # Port
      maxchargepower: # Maximum charge power (W), Highest power the battery system can charge with. The optimizer plans with charging up to this power. Some devices also use it as grid charging power.
      maxdischargecurrent: # Max Discharge Current, Battery max discharge current in A, written back when leaving hold mode. Inverter default is 50 A for H3-Pro/Smart (26 A for H3).
      capacity: 50 # Battery capacity (kWh), optional
      minsoc: 10 # Minimum charge (%), Lower limit as configured on the battery system. Used by optimizer. (optional)
      maxsoc: 100 # Maximum charge (%), Upper limit as configured on the battery system. Used by optimizer and, on some devices, for grid charging. (optional)
      maxchargecurrent: 50 # Max Charge Current, Battery max charge current in A, written back when leaving holdcharge mode. Inverter default is 50 A for H3-Pro/Smart. (optional)
      maxdischargepower: # Maximum discharge power (W), Highest power the battery system can discharge with. The optimizer plans with discharging up to this power. Smart mode assumes the battery supplies at most this power to vehicle charging. (optional)