Fronius Symo GEN24 Plus

← Solár, baterie, síť, měřiče

To use active charge control, the Energy Cost Assistant (ECA) must not be activated in Fronius Solar.web. (Fronius Solar.web -> Settings -> Operating Mode -> Self-Consumption) Meter address of primary or secondary meters: on the web interface of the inverter, only the address of the first meter (e.g., 200) can be set. Additional meters receive an ascending number (e.g., 201).

Podporované funkce

Řízení baterie: Externí řízení nabíjení a vybíjení domácí baterie pomocí evcc.
Omezitelné: Výkon střídače lze omezit (např. § 9 EEG). Viz Externí limit.

Oblasti využití

Měřič sítě
Solární výroba
Baterie

Parametry

Název	Popis	Hodnota	Úroveň
`id`	Modbus ID Výchozí: `1`	int	povinné
`host`	IP adresa nebo název hostitele Příklad: `192.0.2.2`		povinné
`port`	Port Výchozí: `502`	int	povinné
`capacity` [kWh]	Battery capacity Příklad: `50`		volitelné
`minsoc` [%]	Minimum charge Lower limit as configured on the battery system. Used by optimizer. Výchozí: `0` Příklad: `25`		volitelné
`maxsoc` [%]	Maximum charge Upper limit as configured on the battery system. Used by optimizer and, on some devices, for grid charging. Výchozí: `100` Příklad: `95`		volitelné
`maxchargepower` [W]	Maximum charge power Highest power the battery system can charge with. The optimizer plans with charging up to this power. Some devices also use it as grid charging power.		pokročilé
`maxdischargepower` [W]	Maximum discharge power Highest power the battery system can discharge with. The optimizer plans with discharging up to this power. Smart mode assumes the battery supplies at most this power to vehicle charging.		pokročilé
`maxchargerate` [%]	Maximum charge rate For forced charging of the battery in percent in relation to the maximum charge power of the battery inverter. Výchozí: `100`		pokročilé

Příklad konfigurace pro evcc.yaml

Pokud nechcete konfigurovat přes uživatelské rozhraní, můžete místo toho použít tento blok YAML.

Měřič sítěSolární výrobaBaterie

meters:
    - name: my_grid
      type: template
      template: fronius-gen24
      usage: grid

      # Modbus TCP
      modbus: tcpip
      id: 200
      host:  # Hostname
      port: 502 # Port

meters:
    - name: my_pv
      type: template
      template: fronius-gen24
      usage: pv

      # Modbus TCP
      modbus: tcpip
      id: 200
      host:  # Hostname
      port: 502 # Port

meters:
    - name: my_battery
      type: template
      template: fronius-gen24
      usage: battery

      # Modbus TCP
      modbus: tcpip
      id: 200
      host:  # Hostname
      port: 502 # Port
      capacity: 50 # Battery capacity (kWh), optional
      minsoc: 0 # Minimum charge (%), Lower limit as configured on the battery system. Used by optimizer. (optional)
      maxsoc: 100 # Maximum charge (%), Upper limit as configured on the battery system. Used by optimizer and, on some devices, for grid charging. (optional)
      maxchargepower: # Maximum charge power (W), Highest power the battery system can charge with. The optimizer plans with charging up to this power. Some devices also use it as grid charging power. (optional)
      maxdischargepower: # Maximum discharge power (W), Highest power the battery system can discharge with. The optimizer plans with discharging up to this power. Smart mode assumes the battery supplies at most this power to vehicle charging. (optional)
      maxchargerate: 100 # Maximum charge rate (%), For forced charging of the battery in percent in relation to the maximum charge power of the battery inverter. (optional)