Přeskočit na obsah
chytré nabíjení

KACO blueplanet hybrid NH3

Tato stránka zobrazuje verzi nightly. Verze release zatím neexistuje.

For KACO blueplanet Hybrid NH3 with AI dongle/Wi-Fi stick. Modbus TCP and the local AISWEI HTTP API must be reachable at the stick's IP address (Modbus TCP port 502, device ID 3; HTTP port 8484). Battery power control uses the local fdbg.cgi endpoint. Maximum charge and discharge power are read from SunSpec Model 802. Battery charge and discharge energy are read from the local AISWEI HTTP API. Configure curtailment through a separate KACO NH3 curtailer device. The grid meter exposed through SunSpec Model 203 provides grid power, import/export energy, and per-phase measurements.

Podporované funkce

  • Řízení baterie: Externí řízení nabíjení a vybíjení domácí baterie pomocí evcc.

Oblasti využití

  • Měřič sítě
  • Solární výroba
  • Baterie

Parametry

NázevPopisHodnotaÚroveň
idModbus ID
Výchozí: 1
intpovinné
hostIP adresa nebo název hostitele
Příklad: 192.0.2.2
povinné
portPort
Výchozí: 502
intpovinné
batteryBattery numbervolitelné
serialInverter serial number (isn)volitelné
capacity [kWh]Battery capacity
Příklad: 50
volitelné
minsoc [%]Minimum charge

Written to the inverter as the discharge limit and used by the optimizer. Only set a value supported by the battery. Minimum value is 5%.

Výchozí: 10
Příklad: 25
volitelné
maxsoc [%]Maximum charge

Written to the inverter as the charge limit and used by the optimizer. Only set a value supported by the battery.

Výchozí: 100
Příklad: 95
volitelné
Příklad konfigurace pro evcc.yaml

Pokud nechcete konfigurovat přes uživatelské rozhraní, můžete místo toho použít tento blok YAML.

meters:
- name: my_grid
type: template
template: kaco-nh3
usage: grid
# Modbus TCP
modbus: tcpip
id: 3
host: # Hostname
port: 502 # Port
meters:
- name: my_pv
type: template
template: kaco-nh3
usage: pv
# Modbus TCP
modbus: tcpip
id: 3
host: # Hostname
port: 502 # Port
meters:
- name: my_battery
type: template
template: kaco-nh3
usage: battery
# Modbus TCP
modbus: tcpip
id: 3
host: # Hostname
port: 502 # Port
battery: # Battery number, [1, 2]
serial: # Inverter serial number (isn)
capacity: 50 # Battery capacity (kWh), optional
minsoc: 10 # Minimum charge (%), Written to the inverter as the discharge limit and used by the optimizer. Only set a value supported by the battery. Minimum value is 5%. (optional)
maxsoc: 100 # Maximum charge (%), Written to the inverter as the charge limit and used by the optimizer. Only set a value supported by the battery. (optional)