Sigenergy Sigen PV Max

← Solár, baterie, síť, měřiče

Modbus TCP must be enabled in the configuration app with installer rights. This option is not available in the mySigen app for customers.

Podporované funkce

Řízení baterie: Externí řízení nabíjení a vybíjení domácí baterie pomocí evcc.

Oblasti využití

Měřič sítě
Solární výroba
Baterie

Parametry

Název	Popis	Hodnota	Úroveň
`id`	Modbus ID Výchozí: `1`	int	povinné
`host`	IP adresa nebo název hostitele Příklad: `192.0.2.2`		povinné
`port`	Port Výchozí: `502`	int	povinné
`capacity` [kWh]	Battery capacity Příklad: `50`		volitelné
`minsoc` [%]	Minimum charge Lower limit as configured on the battery system. Used by optimizer. Výchozí: `0` Příklad: `25`		volitelné
`maxsoc` [%]	Maximum charge Upper limit as configured on the battery system. Used by optimizer and, on some devices, for grid charging. Výchozí: `100` Příklad: `95`		volitelné
`maxacpower` [W]	Maximum AC power of the hybrid inverter Výchozí: `0` Příklad: `5000`		pokročilé
`gateway`	Sigen Energy Gateway installed Uses the "Backup SoC" register (40046) instead of "Discharge Cut-Off SoC" (40048) to block discharge. This keeps the house powered during a grid outage. Výchozí: `false`		pokročilé
`maxchargepower` [W]	Maximum charge power Highest power the battery system can charge with. The optimizer plans with charging up to this power. Some devices also use it as grid charging power.		pokročilé
`maxdischargepower` [W]	Maximum discharge power Highest power the battery system can discharge with. The optimizer plans with discharging up to this power. Smart mode assumes the battery supplies at most this power to vehicle charging.		pokročilé

Příklad konfigurace pro evcc.yaml

Pokud nechcete konfigurovat přes uživatelské rozhraní, můžete místo toho použít tento blok YAML.

Měřič sítěSolární výrobaBaterie

meters:
    - name: my_grid
      type: template
      template: sigenergy
      usage: grid

      # Modbus TCP
      modbus: tcpip
      id: 1
      host:  # Hostname
      port: 502 # Port

meters:
    - name: my_pv
      type: template
      template: sigenergy
      usage: pv

      # Modbus TCP
      modbus: tcpip
      id: 1
      host:  # Hostname
      port: 502 # Port
      maxacpower: 0 # Maximum AC power of the hybrid inverter (W), optional

meters:
    - name: my_battery
      type: template
      template: sigenergy
      usage: battery

      # Modbus TCP
      modbus: tcpip
      id: 1
      host:  # Hostname
      port: 502 # Port
      capacity: 50 # Battery capacity (kWh), optional
      minsoc: 0 # Minimum charge (%), Lower limit as configured on the battery system. Used by optimizer. (optional)
      maxsoc: 100 # Maximum charge (%), Upper limit as configured on the battery system. Used by optimizer and, on some devices, for grid charging. (optional)
      gateway: false # Sigen Energy Gateway installed, Uses the "Backup SoC" register (40046) instead of "Discharge Cut-Off SoC" (40048) to block discharge. This keeps the house powered during a grid outage. (optional)
      maxchargepower: # Maximum charge power (W), Highest power the battery system can charge with. The optimizer plans with charging up to this power. Some devices also use it as grid charging power. (optional)
      maxdischargepower: # Maximum discharge power (W), Highest power the battery system can discharge with. The optimizer plans with discharging up to this power. Smart mode assumes the battery supplies at most this power to vehicle charging. (optional)