Přeskočit na obsah
chytré nabíjení

Solax Hybrid-Inverter (Cloud)

Tato stránka zobrazuje verzi nightly. Přepněte na verzi release.

The Solax hybrid inverter has to be registered in the SolaxCloud.

Attention: Values can only be fetched every 150s and then also can be 5 minutes old. Charging by PV will not be optimal because of this! Only use as fallback if no local access is available.

Oblasti využití

  • Měřič sítě
  • Solární výroba
  • Baterie

Parametry

NázevPopisHodnotaÚroveň
tokenidSolaxCloud TokenID

solaxcloud.com -> Support -> Third-party Ecology (old site) or Service -> API (new site), enter the value of tokenID here (Example: 20241028488283838)

volitelné
serialSerial number

solaxcloud.com -> Device -> Inverter (new site) or Support (old site), use the registration number

volitelné
capacity [kWh]Battery capacity
Příklad: 50
volitelné
minsoc [%]Minimum charge

Lower limit as configured on the battery system. Used by optimizer.

Výchozí: 0
Příklad: 25
volitelné
maxsoc [%]Maximum charge

Upper limit as configured on the battery system. Used by optimizer and, on some devices, for grid charging.

Výchozí: 100
Příklad: 95
volitelné
maxchargepower [W]Maximum charge power

Highest power the battery system can charge with. The optimizer plans with charging up to this power. Some devices also use it as grid charging power.

pokročilé
maxdischargepower [W]Maximum discharge power

Highest power the battery system can discharge with. The optimizer plans with discharging up to this power. Smart mode assumes the battery supplies at most this power to vehicle charging.

pokročilé
cacheCache

Time interval for data refresh

Výchozí: 1s
Příklad: 5m
pokročilé
Příklad konfigurace pro evcc.yaml

Pokud nechcete konfigurovat přes uživatelské rozhraní, můžete místo toho použít tento blok YAML.

meters:
- name: my_grid
type: template
template: solax-hybrid-cloud
usage: grid
tokenid: # SolaxCloud TokenID, [solaxcloud.com](https://www.solaxcloud.com/) -> Support -> Third-party Ecology (old site) or Service -> API (new site), enter the value of `tokenID` here (Example: 20241028488283838)
serial: # Serial number, [solaxcloud.com](https://www.solaxcloud.com/) -> Device -> Inverter (new site) or Support (old site), use the registration number
cache: 1s # Cache, Time interval for data refresh (optional)
meters:
- name: my_pv
type: template
template: solax-hybrid-cloud
usage: pv
tokenid: # SolaxCloud TokenID, [solaxcloud.com](https://www.solaxcloud.com/) -> Support -> Third-party Ecology (old site) or Service -> API (new site), enter the value of `tokenID` here (Example: 20241028488283838)
serial: # Serial number, [solaxcloud.com](https://www.solaxcloud.com/) -> Device -> Inverter (new site) or Support (old site), use the registration number
cache: 1s # Cache, Time interval for data refresh (optional)
meters:
- name: my_battery
type: template
template: solax-hybrid-cloud
usage: battery
tokenid: # SolaxCloud TokenID, [solaxcloud.com](https://www.solaxcloud.com/) -> Support -> Third-party Ecology (old site) or Service -> API (new site), enter the value of `tokenID` here (Example: 20241028488283838)
serial: # Serial number, [solaxcloud.com](https://www.solaxcloud.com/) -> Device -> Inverter (new site) or Support (old site), use the registration number
capacity: 50 # Battery capacity (kWh), optional
minsoc: 0 # Minimum charge (%), Lower limit as configured on the battery system. Used by optimizer. (optional)
maxsoc: 100 # Maximum charge (%), Upper limit as configured on the battery system. Used by optimizer and, on some devices, for grid charging. (optional)
maxchargepower: # Maximum charge power (W), Highest power the battery system can charge with. The optimizer plans with charging up to this power. Some devices also use it as grid charging power. (optional)
maxdischargepower: # Maximum discharge power (W), Highest power the battery system can discharge with. The optimizer plans with discharging up to this power. Smart mode assumes the battery supplies at most this power to vehicle charging. (optional)
cache: 1s # Cache, Time interval for data refresh (optional)