VARTA pulse

← Solár, baterie, síť, měřiče

PV is only available with an additional PV sensor, as the power of the devices registered in the SUNSPEC Manager is not output via Modbus. Element backup requires at least firmware version F21000612. The firmware update is not rolled out automatically, but can be released upon request by VARTA's technical service.

Oblasti využití

Měřič sítě
Solární výroba
Baterie

Parametry

Název	Popis	Hodnota	Úroveň
`id`	Modbus ID Výchozí: `1`	int	povinné
`host`	IP adresa nebo název hostitele Příklad: `192.0.2.2`		povinné
`port`	Port Výchozí: `502`	int	povinné
`capacity` [kWh]	Battery capacity Příklad: `50`		volitelné
`minsoc` [%]	Minimum charge Lower limit as configured on the battery system. Used by optimizer. Výchozí: `0` Příklad: `25`		volitelné
`maxsoc` [%]	Maximum charge Upper limit as configured on the battery system. Used by optimizer and, on some devices, for grid charging. Výchozí: `100` Příklad: `95`		volitelné
`maxchargepower` [W]	Maximum charge power Highest power the battery system can charge with. The optimizer plans with charging up to this power. Some devices also use it as grid charging power.		pokročilé
`maxdischargepower` [W]	Maximum discharge power Highest power the battery system can discharge with. The optimizer plans with discharging up to this power. Smart mode assumes the battery supplies at most this power to vehicle charging. Výchozí: `4000`		pokročilé
`watchdog`	Watchdog Výchozí: `120s`		pokročilé

Příklad konfigurace pro evcc.yaml

Pokud nechcete konfigurovat přes uživatelské rozhraní, můžete místo toho použít tento blok YAML.

Měřič sítěSolární výrobaBaterie

meters:
    - name: my_grid
      type: template
      template: varta
      usage: grid

      # Modbus TCP
      modbus: tcpip
      id: 255
      host:  # Hostname
      port: 502 # Port

meters:
    - name: my_pv
      type: template
      template: varta
      usage: pv

      # Modbus TCP
      modbus: tcpip
      id: 255
      host:  # Hostname
      port: 502 # Port

meters:
    - name: my_battery
      type: template
      template: varta
      usage: battery

      # Modbus TCP
      modbus: tcpip
      id: 255
      host:  # Hostname
      port: 502 # Port
      capacity: 50 # Battery capacity (kWh), optional
      minsoc: 0 # Minimum charge (%), Lower limit as configured on the battery system. Used by optimizer. (optional)
      maxsoc: 100 # Maximum charge (%), Upper limit as configured on the battery system. Used by optimizer and, on some devices, for grid charging. (optional)
      maxchargepower: # Maximum charge power (W), Highest power the battery system can charge with. The optimizer plans with charging up to this power. Some devices also use it as grid charging power. (optional)
      maxdischargepower: 4000 # Maximum discharge power (W), Highest power the battery system can discharge with. The optimizer plans with discharging up to this power. Smart mode assumes the battery supplies at most this power to vehicle charging. (optional)
      watchdog: 120s # Watchdog, optional