Sonnen sonnenBatterie

← Solár, baterie, síť, měřiče

For active battery control, the "JSON Write API" must be activated via the sonnenBatterie web interface (under Software-Integration) and the API token generated there must be entered in the battery configuration under token. The two operating modes supported for the sonnenBatterie are "self-consumption" (default) and "time-of-use". The mode can be adapted to the configuration of the sonnenBatterie via the 'defaultmode' parameter. The power for grid charging can be adapted to the inverter power of the sonnenBatterie via the maxchargepower parameter.

Podporované funkce

Řízení baterie: Externí řízení nabíjení a vybíjení domácí baterie pomocí evcc.

Oblasti využití

Měřič sítě
Solární výroba
Baterie

Parametry

Název	Popis	Úroveň
`host`	IP address or hostname Příklad: `192.0.2.2`	volitelné
`defaultmode`	Default mode for battery control Inverter falls back to this mode after charging the battery or after stopping discharge. Výchozí: `self-consumption`	volitelné
`port`	Port Výchozí: `8080`	volitelné
`capacity` [kWh]	Battery capacity Příklad: `50`	volitelné
`minsoc` [%]	Minimum charge Lower limit as configured on the battery system. Used by optimizer. Výchozí: `0` Příklad: `25`	volitelné
`maxsoc` [%]	Maximum charge Upper limit as configured on the battery system. Used by optimizer and, on some devices, for grid charging. Výchozí: `100` Příklad: `95`	volitelné
`token`	Token API Token (required for active battery control)	volitelné
`maxchargepower` [W]	Maximum charge power Highest power the battery system can charge with. The optimizer plans with charging up to this power. Some devices also use it as grid charging power. Výchozí: `3300`	pokročilé
`maxdischargepower` [W]	Maximum discharge power Highest power the battery system can discharge with. The optimizer plans with discharging up to this power. Smart mode assumes the battery supplies at most this power to vehicle charging.	pokročilé
`cache`	Cache Time interval for data refresh Výchozí: `1s` Příklad: `5m`	pokročilé

Příklad konfigurace pro evcc.yaml

Pokud nechcete konfigurovat přes uživatelské rozhraní, můžete místo toho použít tento blok YAML.

Měřič sítěSolární výrobaBaterie

meters:
    - name: my_grid
      type: template
      template: sonnenbatterie
      usage: grid
      host: 192.0.2.2 # IP address or hostname
      port: 8080 # Port, optional
      cache: 1s # Cache, Time interval for data refresh (optional)

meters:
    - name: my_pv
      type: template
      template: sonnenbatterie
      usage: pv
      host: 192.0.2.2 # IP address or hostname
      port: 8080 # Port, optional
      cache: 1s # Cache, Time interval for data refresh (optional)

meters:
    - name: my_battery
      type: template
      template: sonnenbatterie
      usage: battery
      host: 192.0.2.2 # IP address or hostname
      defaultmode: self-consumption # Default mode for battery control, Inverter falls back to this mode after charging the battery or after stopping discharge. [self-consumption, time-of-use]
      port: 8080 # Port, optional
      capacity: 50 # Battery capacity (kWh), optional
      minsoc: 0 # Minimum charge (%), Lower limit as configured on the battery system. Used by optimizer. (optional)
      maxsoc: 100 # Maximum charge (%), Upper limit as configured on the battery system. Used by optimizer and, on some devices, for grid charging. (optional)
      token: # Token, API Token (required for active battery control) (optional)
      maxchargepower: 3300 # Maximum charge power (W), Highest power the battery system can charge with. The optimizer plans with charging up to this power. Some devices also use it as grid charging power. (optional)
      maxdischargepower: # Maximum discharge power (W), Highest power the battery system can discharge with. The optimizer plans with discharging up to this power. Smart mode assumes the battery supplies at most this power to vehicle charging. (optional)
      cache: 1s # Cache, Time interval for data refresh (optional)