ISO15118

← Vozidla

Only supported if the vehicle can provide the state of charge (Soc) to the connected charger. Using ISO15118 with some VW group vehicles, e.g. Porsche Taycan, requires additional configuration in the vehicle. This requires an active location-based charging profile with the lowest minimum charge (25%) and direct charging disabled. Otherwise the vehicle cannot be put into sleep mode.

Podporované funkce

ISO 15118-2: Plug & Charge (identifikace vozidla, přenos stavu nabití).

Parametry

Název	Popis	Úroveň
`title`	Title Will be displayed in the user interface	volitelné
`capacity` [kWh]	Battery capacity Příklad: `50`	volitelné
`icon`	Icon Will be displayed in the user interface Výchozí: `car`	pokročilé
`phases`	Maximum number of phases Used to determine the minimum solar surplus and plan duration.	pokročilé
`minCurrent` [A]	Minimum current The minimum current per connected phase that can be used Příklad: `6`	pokročilé
`maxCurrent` [A]	Maximum current The maximum current per connected phase that can be used Příklad: `16`	pokročilé
`maxPower` [W]	Maximum charging power hint Defines the maximum charging power of the vehicle. Helps improve charge plan accuracy when the vehicle typically uses less than the offered current or supports higher single-phase current compared to three-phase. The offered current of the loadpoint is not affected. Příklad: `10000`	pokročilé
`identifiers`	RFID identification Used to assign the vehicle to a loadpoint via RFID card. The identifier is shown on the loadpoint. Copy the value from there. Learn more.	pokročilé
`priority`	Priority Priority of the loadpoint or vehicle in relation to other loadpoints or vehicles for allocating surplus energy (higher values, higher priority).	pokročilé

Příklad konfigurace pro evcc.yaml

Pokud nechcete konfigurovat přes uživatelské rozhraní, můžete místo toho použít tento blok YAML.

vehicles:
    - name: my_car
      type: template
      template: iso15118
      title: # Title, Will be displayed in the user interface (optional)
      capacity: 50 # Battery capacity (kWh), optional
      icon: car # Icon, Will be displayed in the user interface [car, bike, bus, moped, motorcycle, rocket, scooter, taxi, tractor, rickshaw, shuttle, van, airpurifier, battery, bulb, climate, coffeemaker, compute, cooking, cooler, desktop, device, dishwasher, dryer, floorlamp, generic, heater, heatexchange, heatpump, kettle, laundry, laundry2, machine, meter, microwave, pump, smartconsumer, tool, waterheater] (optional)
      phases: # Maximum number of phases, Used to determine the minimum solar surplus and plan duration. [1, 2, 3] (optional)
      minCurrent: 6 # Minimum current (A), The minimum current per connected phase that can be used (optional)
      maxCurrent: 16 # Maximum current (A), The maximum current per connected phase that can be used (optional)
      maxPower: 10000 # Maximum charging power hint (W), Defines the maximum charging power of the vehicle. Helps improve charge plan accuracy when the vehicle typically uses less than the offered current or supports higher single-phase current compared to three-phase. _The offered current of the loadpoint is not affected._ (optional)
      identifiers: # RFID identification, Used to assign the vehicle to a loadpoint via RFID card. The identifier is shown on the loadpoint. Copy the value from there. [Learn more.](https://docs.evcc.io/en/docs/features/vehicle) (optional)
      priority: # Priority, Priority of the loadpoint or vehicle in relation to other loadpoints or vehicles for allocating surplus energy (higher values, higher priority). (optional)