EcoFlow PowerOcean

← Zonne-energie, thuisbatterij, net, meters

To use the EcoFlow PowerOcean meter you need:

A valid Access Key from the EcoFlow Developer Console
The corresponding Secret Key
The serial number of your PowerOcean system

These credentials can be obtained through the EcoFlow Developer Console after registering your application.

Gebruik

Netmeter
Zonne-energieproductie
Batterij

Parameters

Naam	Omschrijving	Niveau
`accesskey`	Access Key Access Key from EcoFlow Developer Console	optioneel
`secretkey`	Secret Key Secret Key from EcoFlow Developer Console	optioneel
`serial`	Serial	optioneel
`capacity` [kWh]	Battery capacity Voorbeeld: `50`	optioneel
`minsoc` [%]	Minimum charge Lower limit as configured on the battery system. Used by optimizer. Standaard: `0` Voorbeeld: `25`	optioneel
`maxsoc` [%]	Maximum charge Upper limit as configured on the battery system. Used by optimizer and for grid charging. Standaard: `100` Voorbeeld: `95`	optioneel
`region`	API Region If you sometimes see error code 8513, like for example Starlink users do, automatic region detection fails. Here, you can set the API region manually. Possible values: auto (default), europe, or america. Standaard: `auto`	geavanceerd
`cache`	Cache Time interval for data refresh Standaard: `30s` Voorbeeld: `5m`	geavanceerd
`maxchargepower` [W]	Maximum charge power For forced charging of the battery.	geavanceerd
`maxdischargepower` [W]	Maximum discharge power Maximum discharge power of the storage.	geavanceerd

Configuratievoorbeeld voor evcc.yaml

Als u niet via de gebruikersinterface wilt configureren, kunt u ook dit YAML-blok gebruiken.

NetmeterZonne-energieproductieBatterij

meters:
    - name: my_grid
      type: template
      template: ecoflow-powerocean
      usage: grid
      accesskey: # Access Key, Access Key from EcoFlow Developer Console
      secretkey: # Secret Key, Secret Key from EcoFlow Developer Console
      serial: # Serial
      region: auto # API Region, If you sometimes see error code 8513, like for example Starlink users do, automatic region detection fails. Here, you can set the API region manually. Possible values: auto (default), europe, or america. [auto, europe, america] (optional)
      cache: 30s # Cache, Time interval for data refresh (optional)

meters:
    - name: my_pv
      type: template
      template: ecoflow-powerocean
      usage: pv
      accesskey: # Access Key, Access Key from EcoFlow Developer Console
      secretkey: # Secret Key, Secret Key from EcoFlow Developer Console
      serial: # Serial
      region: auto # API Region, If you sometimes see error code 8513, like for example Starlink users do, automatic region detection fails. Here, you can set the API region manually. Possible values: auto (default), europe, or america. [auto, europe, america] (optional)
      cache: 30s # Cache, Time interval for data refresh (optional)

meters:
    - name: my_battery
      type: template
      template: ecoflow-powerocean
      usage: battery
      accesskey: # Access Key, Access Key from EcoFlow Developer Console
      secretkey: # Secret Key, Secret Key from EcoFlow Developer Console
      serial: # Serial
      capacity: 50 # Battery capacity (kWh), optional
      minsoc: 0 # Minimum charge (%), Lower limit as configured on the battery system. Used by optimizer. (optional)
      maxsoc: 100 # Maximum charge (%), Upper limit as configured on the battery system. Used by optimizer and for grid charging. (optional)
      region: auto # API Region, If you sometimes see error code 8513, like for example Starlink users do, automatic region detection fails. Here, you can set the API region manually. Possible values: auto (default), europe, or america. [auto, europe, america] (optional)
      cache: 30s # Cache, Time interval for data refresh (optional)
      maxchargepower: # Maximum charge power (W), For forced charging of the battery. (optional)
      maxdischargepower: # Maximum discharge power (W), Maximum discharge power of the storage. (optional)

Nightly-versie bekijken