Fronius Primo GEN24 Plus

← Zonne-energie, thuisbatterij, net, meters

To use active charge control, the Energy Cost Assistant (ECA) must not be activated in Fronius Solar.web. (Fronius Solar.web -> Settings -> Operating Mode -> Self-Consumption) Meter address of primary or secondary meters: on the web interface of the inverter, only the address of the first meter (e.g., 200) can be set. Additional meters receive an ascending number (e.g., 201).

Ondersteunde functies

Batterijaansturing: Externe aansturing van het laden en ontladen van de thuisbatterij door evcc.
Begrensbaar: De productie van de omvormer kan worden verlaagd (bijv. § 9 EEG). Zie Externe limiet.

Gebruik

Netmeter
Zonne-energieproductie
Batterij

Parameters

Naam	Omschrijving	Waarde	Niveau
`id`	Modbus-ID Standaard: `1`	int	verplicht
`host`	IP-adres of hostnaam Voorbeeld: `192.0.2.2`		verplicht
`port`	Poort Standaard: `502`	int	verplicht
`capacity` [kWh]	Battery capacity Voorbeeld: `50`		optioneel
`minsoc` [%]	Minimum charge Lower limit as configured on the battery system. Used by optimizer. Standaard: `0` Voorbeeld: `25`		optioneel
`maxsoc` [%]	Maximum charge Upper limit as configured on the battery system. Used by optimizer and for grid charging. Standaard: `100` Voorbeeld: `95`		optioneel
`maxchargepower` [W]	Maximum charge power For forced charging of the battery.		geavanceerd
`maxdischargepower` [W]	Maximum discharge power Maximum discharge power of the storage.		geavanceerd
`maxchargerate` [%]	Maximum charge rate For forced charging of the battery in percent in relation to the maximum charge power of the battery inverter. Standaard: `100`		geavanceerd

Configuratievoorbeeld voor evcc.yaml

Als u niet via de gebruikersinterface wilt configureren, kunt u ook dit YAML-blok gebruiken.

NetmeterZonne-energieproductieBatterij

meters:
    - name: my_grid
      type: template
      template: fronius-gen24
      usage: grid

      # Modbus TCP
      modbus: tcpip
      id: 200
      host:  # Hostname
      port: 502 # Port

meters:
    - name: my_pv
      type: template
      template: fronius-gen24
      usage: pv

      # Modbus TCP
      modbus: tcpip
      id: 200
      host:  # Hostname
      port: 502 # Port

meters:
    - name: my_battery
      type: template
      template: fronius-gen24
      usage: battery

      # Modbus TCP
      modbus: tcpip
      id: 200
      host:  # Hostname
      port: 502 # Port
      capacity: 50 # Battery capacity (kWh), optional
      minsoc: 0 # Minimum charge (%), Lower limit as configured on the battery system. Used by optimizer. (optional)
      maxsoc: 100 # Maximum charge (%), Upper limit as configured on the battery system. Used by optimizer and for grid charging. (optional)
      maxchargepower: # Maximum charge power (W), For forced charging of the battery. (optional)
      maxdischargepower: # Maximum discharge power (W), Maximum discharge power of the storage. (optional)
      maxchargerate: 100 # Maximum charge rate (%), For forced charging of the battery in percent in relation to the maximum charge power of the battery inverter. (optional)

Nightly-versie bekijken