Ferroamp EnergyHub

← Zonne-energie, thuisbatterij, net, meters

Modbus TCP has to be enabled for the EnergyHub by the installer or Ferroamp support. The interface is only reachable via the EnergyHub's Ethernet interface. Grid values are measured by the external current transformers (CTs) at the grid connection point.

Ondersteunde functies

Batterijaansturing: Externe aansturing van het laden en ontladen van de thuisbatterij door evcc.

Gebruik

Netmeter
Zonne-energieproductie
Batterij

Parameters

Naam	Omschrijving	Waarde	Niveau
`id`	Modbus-ID Standaard: `1`	int	verplicht
`host`	IP-adres of hostnaam Voorbeeld: `192.0.2.2`		verplicht
`port`	Poort Standaard: `502`	int	verplicht
`maxchargepower` [W]	Maximum charge power Highest power the battery system can charge with. The optimizer plans with charging up to this power. Some devices also use it as grid charging power.		optioneel
`maxdischargepower` [W]	Maximum discharge power Highest power the battery system can discharge with. The optimizer plans with discharging up to this power. Smart mode assumes the battery supplies at most this power to vehicle charging.		optioneel
`minsoc` [%]	Minimum charge Lower limit as configured on the battery system. Used by optimizer. Standaard: `0` Voorbeeld: `25`		optioneel
`maxsoc` [%]	Maximum charge Upper limit as configured on the battery system. Used by optimizer and, on some devices, for grid charging. Standaard: `100` Voorbeeld: `95`		optioneel

Configuratievoorbeeld voor evcc.yaml

Als u niet via de gebruikersinterface wilt configureren, kunt u ook dit YAML-blok gebruiken.

NetmeterZonne-energieproductieBatterij

meters:
    - name: my_grid
      type: template
      template: ferroamp-energyhub
      usage: grid

      # Modbus TCP
      modbus: tcpip
      id: 1
      host:  # Hostname
      port: 502 # Port

meters:
    - name: my_pv
      type: template
      template: ferroamp-energyhub
      usage: pv

      # Modbus TCP
      modbus: tcpip
      id: 1
      host:  # Hostname
      port: 502 # Port

meters:
    - name: my_battery
      type: template
      template: ferroamp-energyhub
      usage: battery

      # Modbus TCP
      modbus: tcpip
      id: 1
      host:  # Hostname
      port: 502 # Port
      maxchargepower: # Maximum charge power (W), Highest power the battery system can charge with. The optimizer plans with charging up to this power. Some devices also use it as grid charging power.
      maxdischargepower: # Maximum discharge power (W), Highest power the battery system can discharge with. The optimizer plans with discharging up to this power. Smart mode assumes the battery supplies at most this power to vehicle charging.
      minsoc: 0 # Minimum charge (%), Lower limit as configured on the battery system. Used by optimizer. (optional)
      maxsoc: 100 # Maximum charge (%), Upper limit as configured on the battery system. Used by optimizer and, on some devices, for grid charging. (optional)