Fronius Solar API V1

← Zonne-energie, thuisbatterij, net, meters

Solar API should only be used as fallback. Integration via Modbus is preferred.

Username and password are only required for active battery control.

Attention: Active battery control should only be used if no other settings for time-dependent battery control were made in the inverter configuration under "Energy Management" - "Battery Management", as existing settings will be overwritten. Choose corresponding configuration URI!

Ondersteunde functies

Batterijaansturing: Externe aansturing van het laden en ontladen van de thuisbatterij door evcc.

Gebruik

Netmeter
Zonne-energieproductie
Batterij

Parameters

Naam	Omschrijving	Niveau
`host`	IP address or hostname Voorbeeld: `192.0.2.2`	optioneel
`user`	Username (for active battery control) e.g. email address, user id, etc. Standaard: `customer`	optioneel
`password`	Password (for active battery control) Service account password	optioneel
`capacity` [kWh]	Battery capacity Voorbeeld: `50`	optioneel
`minsoc` [%]	Minimum charge Lower limit as configured on the battery system. Used by optimizer. Standaard: `0` Voorbeeld: `25`	optioneel
`maxsoc` [%]	Maximum charge Upper limit as configured on the battery system. Used by optimizer and, on some devices, for grid charging. Standaard: `100` Voorbeeld: `95`	optioneel
`batteryconfiguri`	Battery configuration URI Firmware starting with 1.36.5-1 requires /api/config. Standaard: `/config`	geavanceerd
`maxchargepower` [W]	Maximum charge power Highest power the battery system can charge with. The optimizer plans with charging up to this power. Some devices also use it as grid charging power.	geavanceerd
`maxdischargepower` [W]	Maximum discharge power Highest power the battery system can discharge with. The optimizer plans with discharging up to this power. Smart mode assumes the battery supplies at most this power to vehicle charging.	geavanceerd
`cache`	Cache Time interval for data refresh Standaard: `1s` Voorbeeld: `5m`	geavanceerd

Configuratievoorbeeld voor evcc.yaml

Als u niet via de gebruikersinterface wilt configureren, kunt u ook dit YAML-blok gebruiken.

NetmeterZonne-energieproductieBatterij

meters:
    - name: my_grid
      type: template
      template: fronius-solarapi-v1
      usage: grid
      host: 192.0.2.2 # IP address or hostname
      user: customer # Username (for active battery control), e.g. email address, user id, etc. (optional)
      password: # Password (for active battery control), Service account password (optional)
      batteryconfiguri: /config # Battery configuration URI, Firmware starting with 1.36.5-1 requires /api/config. [/config, /api/config] (optional)
      cache: 1s # Cache, Time interval for data refresh (optional)

meters:
    - name: my_pv
      type: template
      template: fronius-solarapi-v1
      usage: pv
      host: 192.0.2.2 # IP address or hostname
      user: customer # Username (for active battery control), e.g. email address, user id, etc. (optional)
      password: # Password (for active battery control), Service account password (optional)
      batteryconfiguri: /config # Battery configuration URI, Firmware starting with 1.36.5-1 requires /api/config. [/config, /api/config] (optional)
      cache: 1s # Cache, Time interval for data refresh (optional)

meters:
    - name: my_battery
      type: template
      template: fronius-solarapi-v1
      usage: battery
      host: 192.0.2.2 # IP address or hostname
      user: customer # Username (for active battery control), e.g. email address, user id, etc. (optional)
      password: # Password (for active battery control), Service account password (optional)
      capacity: 50 # Battery capacity (kWh), optional
      minsoc: 0 # Minimum charge (%), Lower limit as configured on the battery system. Used by optimizer. (optional)
      maxsoc: 100 # Maximum charge (%), Upper limit as configured on the battery system. Used by optimizer and, on some devices, for grid charging. (optional)
      batteryconfiguri: /config # Battery configuration URI, Firmware starting with 1.36.5-1 requires /api/config. [/config, /api/config] (optional)
      maxchargepower: # Maximum charge power (W), Highest power the battery system can charge with. The optimizer plans with charging up to this power. Some devices also use it as grid charging power. (optional)
      maxdischargepower: # Maximum discharge power (W), Highest power the battery system can discharge with. The optimizer plans with discharging up to this power. Smart mode assumes the battery supplies at most this power to vehicle charging. (optional)
      cache: 1s # Cache, Time interval for data refresh (optional)