IoTaWatt Energy Monitor

← Zonne-energie, thuisbatterij, net, meters

Deze pagina toont de nightly-versie. Schakel over naar de releaseversie.

Requires an IoTaWatt device accessible on the local network. Find available series names on the IoTaWatt status page (http://<device-host>). For single-phase setups, configure only the main series (e.g. GridNet, Solar). For three-phase, configure one series per phase (e.g. Grid_A, Grid_B, Grid_C).

Gebruik

• Netmeter
• Zonne-energieproductie
• Ladermeter

Parameters

Naam	Omschrijving	Waarde	Niveau
host	IP address or hostname Voorbeeld: 192.0.2.2		optioneel
series	L1 / single-phase series IoTaWatt series name (Watts). Check the IoTaWatt status page for available series. Voorbeeld: GridNet		optioneel
seriesL2	L2 series (three-phase) Series name for phase L2. Leave empty for single-phase.		geavanceerd
seriesL3	L3 series (three-phase) Series name for phase L3. Leave empty for single-phase.		geavanceerd
cache	Cache Time interval for data refresh Standaard: 2s Voorbeeld: 5m		geavanceerd

Configuratievoorbeeld voor evcc.yaml

Als u niet via de gebruikersinterface wilt configureren, kunt u ook dit YAML-blok gebruiken.

NetmeterZonne-energieproductieLadermeter

meters:
    - name: my_grid
      type: template
      template: iotawatt
      usage: grid
      host: 192.0.2.2 # IP address or hostname
      series: GridNet # L1 / single-phase series, IoTaWatt series name (Watts). Check the IoTaWatt status page for available series.
      seriesL2: # L2 series (three-phase), Series name for phase L2. Leave empty for single-phase. (optional)
      seriesL3: # L3 series (three-phase), Series name for phase L3. Leave empty for single-phase. (optional)
      cache: 2s # Cache, Time interval for data refresh (optional)

meters:
    - name: my_pv
      type: template
      template: iotawatt
      usage: pv
      host: 192.0.2.2 # IP address or hostname
      series: GridNet # L1 / single-phase series, IoTaWatt series name (Watts). Check the IoTaWatt status page for available series.
      seriesL2: # L2 series (three-phase), Series name for phase L2. Leave empty for single-phase. (optional)
      seriesL3: # L3 series (three-phase), Series name for phase L3. Leave empty for single-phase. (optional)
      cache: 2s # Cache, Time interval for data refresh (optional)

meters:
    - name: my_charger
      type: template
      template: iotawatt
      usage: charge
      host: 192.0.2.2 # IP address or hostname
      series: GridNet # L1 / single-phase series, IoTaWatt series name (Watts). Check the IoTaWatt status page for available series.
      seriesL2: # L2 series (three-phase), Series name for phase L2. Leave empty for single-phase. (optional)
      seriesL3: # L3 series (three-phase), Series name for phase L3. Leave empty for single-phase. (optional)
      cache: 2s # Cache, Time interval for data refresh (optional)