LG ESS Home 8/10

← Zonne-energie, thuisbatterij, net, meters

Deze pagina toont de nightly-versie. Schakel over naar de releaseversie.

To use the battery control, a firmware version greater than or equal to 10.05.7430 / R2155 is required

Ondersteunde functies

• Batterijaansturing: Externe aansturing van het laden en ontladen van de thuisbatterij door evcc.

Gebruik

• Netmeter
• Zonne-energieproductie
• Batterij

Parameters

Naam	Omschrijving	Waarde	Niveau
host	IP address or hostname Voorbeeld: 192.0.2.2		optioneel
password	Password User password, see https://github.com/Morluktom/ioBroker.lg-ess-home/tree/master#getting-the-password. Alteratively, use registration id for admin login.		optioneel
capacity [kWh]	Battery capacity Voorbeeld: 50		optioneel
minsoc [%]	Minimum charge Lower limit as configured on the battery system. Used by optimizer. Standaard: 0 Voorbeeld: 25		optioneel
maxsoc [%]	Maximum charge Upper limit as configured on the battery system. Used by optimizer and, on some devices, for grid charging. Standaard: 100 Voorbeeld: 95		optioneel
registration	Registration ID ID of the LG ESS HOME inverter. Voorbeeld: DE200...		geavanceerd
maxchargepower [W]	Maximum charge power Highest power the battery system can charge with. The optimizer plans with charging up to this power. Some devices also use it as grid charging power.		geavanceerd
maxdischargepower [W]	Maximum discharge power Highest power the battery system can discharge with. The optimizer plans with discharging up to this power. Smart mode assumes the battery supplies at most this power to vehicle charging.		geavanceerd

Configuratievoorbeeld voor evcc.yaml

Als u niet via de gebruikersinterface wilt configureren, kunt u ook dit YAML-blok gebruiken.

NetmeterZonne-energieproductieBatterij

meters:
    - name: my_grid
      type: template
      template: lg-ess-home-8-10
      usage: grid
      host: 192.0.2.2 # IP address or hostname
      password: # Password, User password, see https://github.com/Morluktom/ioBroker.lg-ess-home/tree/master#getting-the-password. Alteratively, use registration id for admin login. (optional)
      registration: DE200... # Registration ID, ID of the LG ESS HOME inverter. (optional)

meters:
    - name: my_pv
      type: template
      template: lg-ess-home-8-10
      usage: pv
      host: 192.0.2.2 # IP address or hostname
      password: # Password, User password, see https://github.com/Morluktom/ioBroker.lg-ess-home/tree/master#getting-the-password. Alteratively, use registration id for admin login. (optional)
      registration: DE200... # Registration ID, ID of the LG ESS HOME inverter. (optional)

meters:
    - name: my_battery
      type: template
      template: lg-ess-home-8-10
      usage: battery
      host: 192.0.2.2 # IP address or hostname
      password: # Password, User password, see https://github.com/Morluktom/ioBroker.lg-ess-home/tree/master#getting-the-password. Alteratively, use registration id for admin login. (optional)
      capacity: 50 # Battery capacity (kWh), optional
      minsoc: 0 # Minimum charge (%), Lower limit as configured on the battery system. Used by optimizer. (optional)
      maxsoc: 100 # Maximum charge (%), Upper limit as configured on the battery system. Used by optimizer and, on some devices, for grid charging. (optional)
      registration: DE200... # Registration ID, ID of the LG ESS HOME inverter. (optional)
      maxchargepower: # Maximum charge power (W), Highest power the battery system can charge with. The optimizer plans with charging up to this power. Some devices also use it as grid charging power. (optional)
      maxdischargepower: # Maximum discharge power (W), Highest power the battery system can discharge with. The optimizer plans with discharging up to this power. Smart mode assumes the battery supplies at most this power to vehicle charging. (optional)