SMA Smart Energy Hybrid Inverter

← Zonne-energie, thuisbatterij, net, meters

When using active battery control by evcc, the 'Forecast-based Charging' function in the SMA portal must not be active. Otherwise, conflicts may arise when controlling the battery.

Ondersteunde functies

Batterijaansturing: Externe aansturing van het laden en ontladen van de thuisbatterij door evcc.

Gebruik

Netmeter
Zonne-energieproductie
Batterij

Parameters

Naam	Omschrijving	Waarde	Niveau
`id`	Modbus-ID Standaard: `1`	int	verplicht
`host`	IP-adres of hostnaam Voorbeeld: `192.0.2.2`		verplicht
`port`	Poort Standaard: `502`	int	verplicht
`capacity` [kWh]	Battery capacity Voorbeeld: `50`		optioneel
`minsoc` [%]	Minimum charge Lower limit as configured on the battery system. Used by optimizer. Standaard: `0` Voorbeeld: `25`		optioneel
`maxsoc` [%]	Maximum charge Upper limit as configured on the battery system. Used by optimizer and, on some devices, for grid charging. Standaard: `100` Voorbeeld: `95`		optioneel
`maxacpower` [W]	Maximum AC power of the hybrid inverter Standaard: `0` Voorbeeld: `5000`		geavanceerd
`maxchargepower` [W]	Maximum charge power Highest power the battery system can charge with. The optimizer plans with charging up to this power. Some devices also use it as grid charging power. Standaard: `4200`		geavanceerd
`maxdischargepower` [W]	Maximum discharge power Highest power the battery system can discharge with. The optimizer plans with discharging up to this power. Smart mode assumes the battery supplies at most this power to vehicle charging. Standaard: `4200`		geavanceerd
`watchdog`	Watchdog Standaard: `60s`		geavanceerd

Configuratievoorbeeld voor evcc.yaml

Als u niet via de gebruikersinterface wilt configureren, kunt u ook dit YAML-blok gebruiken.

Zonne-energieproductieBatterijNetmeter

meters:
    - name: my_pv
      type: template
      template: sma-hybrid
      usage: pv

      # Modbus TCP
      modbus: tcpip
      id: 3
      host:  # Hostname
      port: 502 # Port
      maxacpower: 0 # Maximum AC power of the hybrid inverter (W), optional

meters:
    - name: my_battery
      type: template
      template: sma-hybrid
      usage: battery

      # Modbus TCP
      modbus: tcpip
      id: 3
      host:  # Hostname
      port: 502 # Port
      capacity: 50 # Battery capacity (kWh), optional
      minsoc: 0 # Minimum charge (%), Lower limit as configured on the battery system. Used by optimizer. (optional)
      maxsoc: 100 # Maximum charge (%), Upper limit as configured on the battery system. Used by optimizer and, on some devices, for grid charging. (optional)
      maxchargepower: 4200 # Maximum charge power (W), Highest power the battery system can charge with. The optimizer plans with charging up to this power. Some devices also use it as grid charging power. (optional)
      maxdischargepower: 4200 # Maximum discharge power (W), Highest power the battery system can discharge with. The optimizer plans with discharging up to this power. Smart mode assumes the battery supplies at most this power to vehicle charging. (optional)
      watchdog: 60s # Watchdog, optional

meters:
    - name: my_grid
      type: template
      template: sma-hybrid
      usage: grid

      # Modbus TCP
      modbus: tcpip
      id: 3
      host:  # Hostname
      port: 502 # Port