Sonnen sonnenBatterie
For active battery control, the "JSON Write API" must be activated via the sonnenBatterie web interface (under Software-Integration) and the API token generated there must be entered in the battery configuration under token.
The operating modes supported for the sonnenBatterie are "self-consumption" (default), "time-of-use" and "optimization". The mode can be adapted to the configuration of the sonnenBatterie via the 'defaultmode' parameter.
The power for grid charging can be adapted to the inverter power of the sonnenBatterie via the maxchargepower parameter.
evcc controls the backup buffer: the current SoC while holding, minsoc in normal operation and maxsoc while charging. A backup buffer set in the sonnenBatterie web interface is overwritten. The sonnenBatterie only accepts a backup buffer of 0 or 5 to 100, so minsoc must be 0 or at least 5.
Ondersteunde functies
- Batterijaansturing: Externe aansturing van het laden en ontladen van de thuisbatterij door evcc.
Gebruik
- Netmeter
- Zonne-energieproductie
- Batterij
Parameters
| Naam | Omschrijving | Waarde | Niveau |
|---|---|---|---|
host | IP address or hostname | optioneel | |
defaultmode | Default mode for battery control Inverter falls back to this mode after charging the battery or after stopping discharge. | optioneel | |
port | Port | optioneel | |
capacity [kWh] | Battery capacity | optioneel | |
minsoc [%] | Minimum charge Lower limit as configured on the battery system. Used by optimizer. The sonnenBatterie only accepts 0 or 5 to 100. | optioneel | |
maxsoc [%] | Maximum charge Upper limit as configured on the battery system. Used by optimizer and, on some devices, for grid charging. | optioneel | |
token | Token API Token (required for active battery control) | optioneel | |
maxchargepower [W] | Maximum charge power Highest power the battery system can charge with. The optimizer plans with charging up to this power. Some devices also use it as grid charging power. | geavanceerd | |
maxdischargepower [W] | Maximum discharge power Highest power the battery system can discharge with. The optimizer plans with discharging up to this power. Smart mode assumes the battery supplies at most this power to vehicle charging. | geavanceerd | |
cache | Cache Time interval for data refresh | geavanceerd |
Configuratievoorbeeld voor evcc.yaml
Als u niet via de gebruikersinterface wilt configureren, kunt u ook dit YAML-blok gebruiken.
meters: - name: my_grid type: template template: sonnenbatterie usage: grid host: 192.0.2.2 # IP address or hostname port: 8080 # Port, optional cache: 1s # Cache, Time interval for data refresh (optional)meters: - name: my_pv type: template template: sonnenbatterie usage: pv host: 192.0.2.2 # IP address or hostname port: 8080 # Port, optional cache: 1s # Cache, Time interval for data refresh (optional)meters: - name: my_battery type: template template: sonnenbatterie usage: battery host: 192.0.2.2 # IP address or hostname defaultmode: self-consumption # Default mode for battery control, Inverter falls back to this mode after charging the battery or after stopping discharge. [self-consumption, time-of-use, optimization] port: 8080 # Port, optional capacity: 50 # Battery capacity (kWh), optional minsoc: 0 # Minimum charge (%), Lower limit as configured on the battery system. Used by optimizer. The sonnenBatterie only accepts 0 or 5 to 100. (optional) maxsoc: 100 # Maximum charge (%), Upper limit as configured on the battery system. Used by optimizer and, on some devices, for grid charging. (optional) token: # Token, API Token (required for active battery control) (optional) maxchargepower: 3300 # Maximum charge power (W), Highest power the battery system can charge with. The optimizer plans with charging up to this power. Some devices also use it as grid charging power. (optional) maxdischargepower: # Maximum discharge power (W), Highest power the battery system can discharge with. The optimizer plans with discharging up to this power. Smart mode assumes the battery supplies at most this power to vehicle charging. (optional) cache: 1s # Cache, Time interval for data refresh (optional)