SunEnergyXT SunEnergyXT 500 / 500 PRO

← Zonne-energie, thuisbatterij, net, meters

Deze pagina toont de nightly-versie. Schakel over naar de releaseversie.

The battery's local mode must be enabled in the manufacturer's app. Furthermore, the device's IP address must be set to a fixed, permanent IP address in the router. An external meter (e.g., Shelly) measuring the grid connection point must be connected to the battery via the manufacturer's app. It is required for the grid usage, and also for the battery usage, because the normal battery mode enables the device's zero feed-in regulation, which reads this meter.

Ondersteunde functies

• Batterijaansturing: Externe aansturing van het laden en ontladen van de thuisbatterij door evcc.

Gebruik

• Netmeter
• Zonne-energieproductie
• Batterij

🐜 Bekende beperkingen

Currently, each head storage must be individually added in EVCC. Connecting multiple head storages into one system has been announced by the manufacturer but is not yet implemented on the software side.

maxacpower and maxdischargepower are derived from the selected model when left empty. An explicitly configured value takes precedence and is not clamped to the model limit.

Parameters

Naam	Omschrijving	Waarde	Niveau
model	Model standard for the SunEnergyXT 500, pro for the SunEnergyXT 500 PRO. Determines the maximum AC and discharge power (800 W resp. 2400 W).	standardpro	optioneel
host	IP address or hostname Voorbeeld: 192.0.2.2		optioneel
capacity [kWh]	Battery capacity Total storage capacity: head unit 5 kWh, each extension pack adds 5 kWh. So 5 (head unit only), 10 (+1 extension) or 15 (+2 extensions). The number of detected battery packs is reported in the ON field of /read. Standaard: 5 Voorbeeld: 50		optioneel
minsoc [%]	Minimum charge Lower limit as configured on the battery system. Used by optimizer. Standaard: 0 Voorbeeld: 25		optioneel
maxsoc [%]	Maximum charge Upper limit as configured on the battery system. Used by optimizer and, on some devices, for grid charging. Standaard: 100 Voorbeeld: 95		optioneel
maxacpower [W]	Maximum AC power of the hybrid inverter Standaard: 0 Voorbeeld: 5000		geavanceerd
maxchargepower [W]	Maximum charge power Highest power the battery system can charge with. The optimizer plans with charging up to this power. Some devices also use it as grid charging power. Standaard: 2400		geavanceerd
maxdischargepower [W]	Maximum discharge power Highest power the battery system can discharge with. The optimizer plans with discharging up to this power. Smart mode assumes the battery supplies at most this power to vehicle charging.		geavanceerd
cache	Cache Time interval for data refresh Standaard: 2s Voorbeeld: 5m		geavanceerd
timeout	Timeout Standaard: 10s Voorbeeld: 10s		geavanceerd

Configuratievoorbeeld voor evcc.yaml

Als u niet via de gebruikersinterface wilt configureren, kunt u ook dit YAML-blok gebruiken.

NetmeterZonne-energieproductieBatterij

meters:
    - name: my_grid
      type: template
      template: sunenergyxt-500
      usage: grid
      model: # Model, `standard` for the SunEnergyXT 500, `pro` for the SunEnergyXT 500 PRO. Determines the maximum AC and discharge power (800 W resp. 2400 W). [standard, pro]
      host: 192.0.2.2 # IP address or hostname
      cache: 2s # Cache, Time interval for data refresh (optional)
      timeout: 10s # Timeout, optional

meters:
    - name: my_pv
      type: template
      template: sunenergyxt-500
      usage: pv
      model: # Model, `standard` for the SunEnergyXT 500, `pro` for the SunEnergyXT 500 PRO. Determines the maximum AC and discharge power (800 W resp. 2400 W). [standard, pro]
      host: 192.0.2.2 # IP address or hostname
      maxacpower: 0 # Maximum AC power of the hybrid inverter (W), optional
      cache: 2s # Cache, Time interval for data refresh (optional)
      timeout: 10s # Timeout, optional

meters:
    - name: my_battery
      type: template
      template: sunenergyxt-500
      usage: battery
      model: # Model, `standard` for the SunEnergyXT 500, `pro` for the SunEnergyXT 500 PRO. Determines the maximum AC and discharge power (800 W resp. 2400 W). [standard, pro]
      host: 192.0.2.2 # IP address or hostname
      capacity: 5 # Battery capacity (kWh), Total storage capacity: head unit 5 kWh, each extension pack adds 5 kWh. So 5 (head unit only), 10 (+1 extension) or 15 (+2 extensions). The number of detected battery packs is reported in the `ON` field of `/read`. (optional)
      minsoc: 0 # Minimum charge (%), Lower limit as configured on the battery system. Used by optimizer. (optional)
      maxsoc: 100 # Maximum charge (%), Upper limit as configured on the battery system. Used by optimizer and, on some devices, for grid charging. (optional)
      maxchargepower: 2400 # Maximum charge power (W), Highest power the battery system can charge with. The optimizer plans with charging up to this power. Some devices also use it as grid charging power. (optional)
      maxdischargepower: # Maximum discharge power (W), Highest power the battery system can discharge with. The optimizer plans with discharging up to this power. Smart mode assumes the battery supplies at most this power to vehicle charging. (optional)
      cache: 2s # Cache, Time interval for data refresh (optional)
      timeout: 10s # Timeout, optional