Atmoce MG100 M-gateway

← Solare, batteria domestica, rete, contatori

Support for Atmoce MG100 (included with MC100 and MC100-T). Requires installer to enable Modbus TCP in configuration or through Atmozen app; available in firmware 01.01.00.18.10 or later. 'Grid Recharging' and 'Export Power' must be enabled in the Atmozen app to allow battery (dis)charging to/from grid.

Funzionalità supportate

Controllo batteria: Controllo esterno della carica e della scarica della batteria domestica tramite evcc.
Limitabile: La produzione dell’inverter può essere limitata (ad es. § 9 EEG). Vedi Limite esterno.
Riducibile: La potenza assorbita può essere ridotta (ad es. § 14a EnWG). Vedi Limite esterno.

Ambiti di utilizzo

Contatore di rete
Produzione solare
Batteria

Parametri

Nome	Descrizione	Valore	Livello
`id`	ID Modbus Predefinito: `1`	int	obbligatorio
`host`	Indirizzo IP o hostname Esempio: `192.0.2.2`		obbligatorio
`port`	Porta Predefinito: `502`	int	obbligatorio
`firmware`	Firmware version Firmware 01.01.00.28.15 and higher allows for correct hold/holdcharge functionality, dimming and curtailing. Older versions only support hold function without (dis)charge. Predefinito: `<01.01.00.28.15`		facoltativo
`maxacpower` [W]	Maximum AC power of the hybrid inverter Predefinito: `0` Esempio: `5000`		avanzato
`minsoc` [%]	Minimum charge Lower limit as configured on the battery system. Used by optimizer. Predefinito: `10` Esempio: `25`		avanzato
`maxsoc` [%]	Maximum charge Upper limit as configured on the battery system. Used by optimizer and for grid charging. Predefinito: `100` Esempio: `95`		avanzato

Esempio di configurazione per evcc.yaml

Se preferisci non configurare il dispositivo dall’interfaccia, puoi usare questo blocco YAML.

Contatore di reteProduzione solareBatteria

meters:
    - name: my_grid
      type: template
      template: atmoce
      usage: grid

      # Modbus TCP
      modbus: tcpip
      id: 1
      host:  # Hostname
      port: 502 # Port
      firmware: <01.01.00.28.15 # Firmware version, Firmware 01.01.00.28.15 and higher allows for correct hold/holdcharge functionality, dimming and curtailing. Older versions only support hold function without (dis)charge. [<01.01.00.28.15, >=01.01.00.28.15]

meters:
    - name: my_pv
      type: template
      template: atmoce
      usage: pv

      # Modbus TCP
      modbus: tcpip
      id: 1
      host:  # Hostname
      port: 502 # Port
      firmware: <01.01.00.28.15 # Firmware version, Firmware 01.01.00.28.15 and higher allows for correct hold/holdcharge functionality, dimming and curtailing. Older versions only support hold function without (dis)charge. [<01.01.00.28.15, >=01.01.00.28.15]
      maxacpower: 0 # Maximum AC power of the hybrid inverter (W), optional

meters:
    - name: my_battery
      type: template
      template: atmoce
      usage: battery

      # Modbus TCP
      modbus: tcpip
      id: 1
      host:  # Hostname
      port: 502 # Port
      firmware: <01.01.00.28.15 # Firmware version, Firmware 01.01.00.28.15 and higher allows for correct hold/holdcharge functionality, dimming and curtailing. Older versions only support hold function without (dis)charge. [<01.01.00.28.15, >=01.01.00.28.15]
      minsoc: 10 # Minimum charge (%), Lower limit as configured on the battery system. Used by optimizer. (optional)
      maxsoc: 100 # Maximum charge (%), Upper limit as configured on the battery system. Used by optimizer and for grid charging. (optional)

Vedi la versione nightly