Fronius Solar API V1

← Solare, batteria domestica, rete, contatori

Solar API should only be used as fallback. Integration via Modbus is preferred.

Username and password are only required for active battery control.

Attention: Active battery control should only be used if no other settings for time-dependent battery control were made in the inverter configuration under "Energy Management" - "Battery Management", as existing settings will be overwritten. Choose corresponding configuration URI!

Funzionalità supportate

Controllo batteria: Controllo esterno della carica e della scarica della batteria domestica tramite evcc.

Ambiti di utilizzo

Contatore di rete
Produzione solare
Batteria

Parametri

Nome	Descrizione	Livello
`host`	IP address or hostname Esempio: `192.0.2.2`	facoltativo
`user`	Username (for active battery control) e.g. email address, user id, etc. Predefinito: `customer`	facoltativo
`password`	Password (for active battery control) Service account password	facoltativo
`capacity` [kWh]	Battery capacity Esempio: `50`	facoltativo
`minsoc` [%]	Minimum charge Lower limit as configured on the battery system. Used by optimizer. Predefinito: `0` Esempio: `25`	facoltativo
`maxsoc` [%]	Maximum charge Upper limit as configured on the battery system. Used by optimizer and for grid charging. Predefinito: `100` Esempio: `95`	facoltativo
`batteryconfiguri`	Battery configuration URI Firmware starting with 1.36.5-1 requires /api/config. Predefinito: `/config`	avanzato
`maxchargepower` [W]	Maximum charge power For forced charging of the battery.	avanzato
`maxdischargepower` [W]	Maximum discharge power Maximum discharge power of the storage.	avanzato
`cache`	Cache Time interval for data refresh Predefinito: `1s` Esempio: `5m`	avanzato

Esempio di configurazione per evcc.yaml

Se preferisci non configurare il dispositivo dall’interfaccia, puoi usare questo blocco YAML.

Contatore di reteProduzione solareBatteria

meters:
    - name: my_grid
      type: template
      template: fronius-solarapi-v1
      usage: grid
      host: 192.0.2.2 # IP address or hostname
      user: customer # Username (for active battery control), e.g. email address, user id, etc. (optional)
      password: # Password (for active battery control), Service account password (optional)
      batteryconfiguri: /config # Battery configuration URI, Firmware starting with 1.36.5-1 requires /api/config. [/config, /api/config] (optional)
      cache: 1s # Cache, Time interval for data refresh (optional)

meters:
    - name: my_pv
      type: template
      template: fronius-solarapi-v1
      usage: pv
      host: 192.0.2.2 # IP address or hostname
      user: customer # Username (for active battery control), e.g. email address, user id, etc. (optional)
      password: # Password (for active battery control), Service account password (optional)
      batteryconfiguri: /config # Battery configuration URI, Firmware starting with 1.36.5-1 requires /api/config. [/config, /api/config] (optional)
      cache: 1s # Cache, Time interval for data refresh (optional)

meters:
    - name: my_battery
      type: template
      template: fronius-solarapi-v1
      usage: battery
      host: 192.0.2.2 # IP address or hostname
      user: customer # Username (for active battery control), e.g. email address, user id, etc. (optional)
      password: # Password (for active battery control), Service account password (optional)
      capacity: 50 # Battery capacity (kWh), optional
      minsoc: 0 # Minimum charge (%), Lower limit as configured on the battery system. Used by optimizer. (optional)
      maxsoc: 100 # Maximum charge (%), Upper limit as configured on the battery system. Used by optimizer and for grid charging. (optional)
      batteryconfiguri: /config # Battery configuration URI, Firmware starting with 1.36.5-1 requires /api/config. [/config, /api/config] (optional)
      maxchargepower: # Maximum charge power (W), For forced charging of the battery. (optional)
      maxdischargepower: # Maximum discharge power (W), Maximum discharge power of the storage. (optional)
      cache: 1s # Cache, Time interval for data refresh (optional)

Vedi la versione nightly