Sonnen sonnenBatterie

← Solare, batteria domestica, rete, contatori

For active battery control, the "JSON Write API" must be activated via the sonnenBatterie web interface (under Software-Integration) and the API token generated there must be entered in the battery configuration under token. The two operating modes supported for the sonnenBatterie are "self-consumption" (default) and "time-of-use". The mode can be adapted to the configuration of the sonnenBatterie via the 'defaultmode' parameter. The power for grid charging can be adapted to the inverter power of the sonnenBatterie via the maxchargepower parameter.

Funzionalità supportate

Controllo batteria: Controllo esterno della carica e della scarica della batteria domestica tramite evcc.

Ambiti di utilizzo

Contatore di rete
Produzione solare
Batteria

Parametri

Nome	Descrizione	Livello
`host`	IP address or hostname Esempio: `192.0.2.2`	facoltativo
`defaultmode`	Default mode for battery control Inverter falls back to this mode after charging the battery or after stopping discharge. Predefinito: `self-consumption`	facoltativo
`port`	Port Predefinito: `8080`	facoltativo
`capacity` [kWh]	Battery capacity Esempio: `50`	facoltativo
`minsoc` [%]	Minimum charge Lower limit as configured on the battery system. Used by optimizer. Predefinito: `0` Esempio: `25`	facoltativo
`maxsoc` [%]	Maximum charge Upper limit as configured on the battery system. Used by optimizer and for grid charging. Predefinito: `100` Esempio: `95`	facoltativo
`token`	Token API Token (required for active battery control)	facoltativo
`maxchargepower` [W]	Maximum charge power For forced charging of the battery. Predefinito: `3300`	avanzato
`maxdischargepower` [W]	Maximum discharge power Maximum discharge power of the storage.	avanzato
`cache`	Cache Time interval for data refresh Predefinito: `1s` Esempio: `5m`	avanzato

Esempio di configurazione per evcc.yaml

Se preferisci non configurare il dispositivo dall’interfaccia, puoi usare questo blocco YAML.

Contatore di reteProduzione solareBatteria

meters:
    - name: my_grid
      type: template
      template: sonnenbatterie
      usage: grid
      host: 192.0.2.2 # IP address or hostname
      port: 8080 # Port, optional
      cache: 1s # Cache, Time interval for data refresh (optional)

meters:
    - name: my_pv
      type: template
      template: sonnenbatterie
      usage: pv
      host: 192.0.2.2 # IP address or hostname
      port: 8080 # Port, optional
      cache: 1s # Cache, Time interval for data refresh (optional)

meters:
    - name: my_battery
      type: template
      template: sonnenbatterie
      usage: battery
      host: 192.0.2.2 # IP address or hostname
      defaultmode: self-consumption # Default mode for battery control, Inverter falls back to this mode after charging the battery or after stopping discharge. [self-consumption, time-of-use]
      port: 8080 # Port, optional
      capacity: 50 # Battery capacity (kWh), optional
      minsoc: 0 # Minimum charge (%), Lower limit as configured on the battery system. Used by optimizer. (optional)
      maxsoc: 100 # Maximum charge (%), Upper limit as configured on the battery system. Used by optimizer and for grid charging. (optional)
      token: # Token, API Token (required for active battery control) (optional)
      maxchargepower: 3300 # Maximum charge power (W), For forced charging of the battery. (optional)
      maxdischargepower: # Maximum discharge power (W), Maximum discharge power of the storage. (optional)
      cache: 1s # Cache, Time interval for data refresh (optional)

Vedi la versione nightly