Marstek Venus A

← Solare, batteria domestica, rete, contatori

Funzionalità supportate

Controllo batteria: Controllo esterno della carica e della scarica della batteria domestica tramite evcc.

Ambiti di utilizzo

Produzione solare
Batteria

Parametri

Modbus

Nome	Descrizione	Valore	Livello
`id`	ID Modbus Predefinito: `1`	int	obbligatorio
`device`	Nome dispositivo Adattatore USB-RS485 Esempio: `/dev/ttyUSB0`		obbligatorio
`baudrate`	Baudrate Predefinito: `9600`		obbligatorio
`comset`	ComSet Parametro di comunicazione dell’adattatore Predefinito: `8N1`		obbligatorio
`host`	Indirizzo IP o hostname Esempio: `192.0.2.2`		obbligatorio
`port`	Porta Predefinito: `502`	int	obbligatorio
`capacity` [kWh]	Battery capacity Venus A 2.12 kWh, Venus D 2.56 kWh per base unit and per extension Esempio: `50`		facoltativo
`maxchargepower` [W]	Maximum charge power For forced charging of the battery. Venus A 1200 W, Venus D 2200 W		facoltativo
`maxdischargepower` [W]	Maximum discharge power Highest power the battery system can discharge with. The optimizer plans with discharging up to this power. Smart mode assumes the battery supplies at most this power to vehicle charging.		facoltativo
`minsoc` [%]	Minimum charge Lower limit as configured on the battery system. Used by optimizer. Predefinito: `11` Esempio: `25`		facoltativo
`maxsoc` [%]	Maximum charge Upper limit as configured on the battery system. Used by optimizer and, on some devices, for grid charging. Predefinito: `100` Esempio: `95`		facoltativo
`work_mode_normal`	Work mode for Normal state 0=manual, 1=anti-feed, 2=trade mode. Predefinito: `1`		avanzato

Esempio di configurazione per evcc.yaml

Se preferisci non configurare il dispositivo dall’interfaccia, puoi usare questo blocco YAML.

Produzione solareBatteria

meters:
    - name: my_pv
      type: template
      template: marstek-venus-a
      usage: pv

      # RS485 via adapter (Modbus RTU)
      modbus: rs485serial
      id: 1
      device: /dev/ttyUSB0 # USB-RS485 Adapter Adresse
      baudrate: 115200 # Prüfe die Geräteeinstellungen, typische Werte sind 9600, 19200, 38400, 57600, 115200
      comset: "8N1" # Kommunikationsparameter für den Adapter

      # RS485 via TCP/IP (Modbus RTU)
      modbus: rs485tcpip
      id: 1
      host:  # Hostname
      port: 502 # Port

      # Modbus TCP
      modbus: tcpip
      id: 1
      host:  # Hostname
      port: 502 # Port
      work_mode_normal: 1 # Work mode for Normal state, 0=manual, 1=anti-feed, 2=trade mode. (optional)

meters:
    - name: my_battery
      type: template
      template: marstek-venus-a
      usage: battery

      # RS485 via adapter (Modbus RTU)
      modbus: rs485serial
      id: 1
      device: /dev/ttyUSB0 # USB-RS485 Adapter Adresse
      baudrate: 115200 # Prüfe die Geräteeinstellungen, typische Werte sind 9600, 19200, 38400, 57600, 115200
      comset: "8N1" # Kommunikationsparameter für den Adapter

      # RS485 via TCP/IP (Modbus RTU)
      modbus: rs485tcpip
      id: 1
      host:  # Hostname
      port: 502 # Port

      # Modbus TCP
      modbus: tcpip
      id: 1
      host:  # Hostname
      port: 502 # Port
      capacity: 50 # Battery capacity (kWh), Venus A 2.12 kWh, Venus D 2.56 kWh per base unit and per extension
      maxchargepower: # Maximum charge power (W), For forced charging of the battery. Venus A 1200 W, Venus D 2200 W
      maxdischargepower: # Maximum discharge power (W), Highest power the battery system can discharge with. The optimizer plans with discharging up to this power. Smart mode assumes the battery supplies at most this power to vehicle charging.
      minsoc: 11 # Minimum charge (%), Lower limit as configured on the battery system. Used by optimizer. (optional)
      maxsoc: 100 # Maximum charge (%), Upper limit as configured on the battery system. Used by optimizer and, on some devices, for grid charging. (optional)
      work_mode_normal: 1 # Work mode for Normal state, 0=manual, 1=anti-feed, 2=trade mode. (optional)