Marstek Venus E Gen 2.0

← Solare, batteria domestica, rete, contatori

Funzionalità supportate

Controllo batteria: Controllo esterno della carica e della scarica della batteria domestica tramite evcc.

Ambiti di utilizzo

Batteria

Parametri

Modbus

Nome	Descrizione	Valore	Livello
`id`	ID Modbus Predefinito: `1`	int	obbligatorio
`device`	Nome dispositivo Adattatore USB-RS485 Esempio: `/dev/ttyUSB0`		obbligatorio
`baudrate`	Baudrate Predefinito: `9600`		obbligatorio
`comset`	ComSet Parametro di comunicazione dell’adattatore Predefinito: `8N1`		obbligatorio
`host`	Indirizzo IP o hostname Esempio: `192.0.2.2`		obbligatorio
`port`	Porta Predefinito: `502`	int	obbligatorio
`generation`	Generation Venus E, Venus E Gen 2.0 and Venus C are generation 2. Generation 3 uses different registers.		facoltativo
`capacity` [kWh]	Battery capacity Predefinito: `5.12` Esempio: `50`		facoltativo
`minsoc` [%]	Minimum charge Lower limit as configured on the battery system. Used by optimizer. Predefinito: `11` Esempio: `25`		facoltativo
`maxsoc` [%]	Maximum charge Upper limit as configured on the battery system. Used by optimizer and, on some devices, for grid charging. Predefinito: `100` Esempio: `95`		facoltativo
`maxchargepower` [W]	Maximum charge power Highest power the battery system can charge with. The optimizer plans with charging up to this power. Some devices also use it as grid charging power. Predefinito: `2500`		avanzato
`maxdischargepower` [W]	Maximum discharge power Highest power the battery system can discharge with. The optimizer plans with discharging up to this power. Smart mode assumes the battery supplies at most this power to vehicle charging. Predefinito: `800`		avanzato
`work_mode_normal`	Work mode for Normal state 0=manual, 1=anti-feed, 2=trade mode. Predefinito: `1`		avanzato

Esempio di configurazione per evcc.yaml

Se preferisci non configurare il dispositivo dall’interfaccia, puoi usare questo blocco YAML.

meters:
    - name: my_battery
      type: template
      template: marstek-venus-e
      usage: battery

      # RS485 via adapter (Modbus RTU)
      modbus: rs485serial
      id: 1
      device: /dev/ttyUSB0 # USB-RS485 Adapter Adresse
      baudrate: 115200 # Prüfe die Geräteeinstellungen, typische Werte sind 9600, 19200, 38400, 57600, 115200
      comset: "8N1" # Kommunikationsparameter für den Adapter

      # RS485 via TCP/IP (Modbus RTU)
      modbus: rs485tcpip
      id: 1
      host:  # Hostname
      port: 502 # Port

      # Modbus TCP
      modbus: tcpip
      id: 1
      host:  # Hostname
      port: 502 # Port
      generation: # Generation, Venus E, Venus E Gen 2.0 and Venus C are generation 2. Generation 3 uses different registers. [2, 3]
      capacity: 5.12 # Battery capacity (kWh), optional
      minsoc: 11 # Minimum charge (%), Lower limit as configured on the battery system. Used by optimizer. (optional)
      maxsoc: 100 # Maximum charge (%), Upper limit as configured on the battery system. Used by optimizer and, on some devices, for grid charging. (optional)
      maxchargepower: 2500 # Maximum charge power (W), Highest power the battery system can charge with. The optimizer plans with charging up to this power. Some devices also use it as grid charging power. (optional)
      maxdischargepower: 800 # Maximum discharge power (W), Highest power the battery system can discharge with. The optimizer plans with discharging up to this power. Smart mode assumes the battery supplies at most this power to vehicle charging. (optional)
      work_mode_normal: 1 # Work mode for Normal state, 0=manual, 1=anti-feed, 2=trade mode. (optional)