batterX Home

← Zonne-energie, thuisbatterij, net, meters

Ondersteunde functies

Batterijaansturing: Externe aansturing van het laden en ontladen van de thuisbatterij door evcc.

Gebruik

Netmeter
Zonne-energieproductie
Batterij

Parameters

Naam	Omschrijving	Niveau
`host`	IP address or hostname Voorbeeld: `192.0.2.2`	optioneel
`port`	Port Standaard: `80`	optioneel
`externalpv`	Needed when a second solar inverter is connected. This parameter is needed when the BatterX station is connected to another solar inverter. The total produced solar power can so be reported through one system. Further auxilary solar inverters do not need to be connected to evcc. Standaard: `true`	optioneel
`capacity` [kWh]	Battery capacity Voorbeeld: `50`	optioneel
`minsoc` [%]	Minimum charge Lower limit as configured on the battery system. Used by optimizer. Standaard: `0` Voorbeeld: `25`	optioneel
`maxsoc` [%]	Maximum charge Upper limit as configured on the battery system. Used by optimizer and, on some devices, for grid charging. Standaard: `100` Voorbeeld: `95`	optioneel
`maxchargepower` [W]	Maximum charge power Highest power the battery system can charge with. The optimizer plans with charging up to this power. Some devices also use it as grid charging power.	geavanceerd
`maxdischargepower` [W]	Maximum discharge power Highest power the battery system can discharge with. The optimizer plans with discharging up to this power. Smart mode assumes the battery supplies at most this power to vehicle charging.	geavanceerd

Configuratievoorbeeld voor evcc.yaml

Als u niet via de gebruikersinterface wilt configureren, kunt u ook dit YAML-blok gebruiken.

NetmeterZonne-energieproductieBatterij

meters:
    - name: my_grid
      type: template
      template: batterX
      usage: grid
      host: 192.0.2.2 # IP address or hostname
      port: 80 # Port, optional
      externalpv: true # Needed when a second solar inverter is connected., This parameter is needed when the BatterX station is connected to another solar inverter. The total produced solar power can so be reported through one system. Further auxilary solar inverters do not need to be connected to evcc. (optional)

meters:
    - name: my_pv
      type: template
      template: batterX
      usage: pv
      host: 192.0.2.2 # IP address or hostname
      port: 80 # Port, optional
      externalpv: true # Needed when a second solar inverter is connected., This parameter is needed when the BatterX station is connected to another solar inverter. The total produced solar power can so be reported through one system. Further auxilary solar inverters do not need to be connected to evcc. (optional)

meters:
    - name: my_battery
      type: template
      template: batterX
      usage: battery
      host: 192.0.2.2 # IP address or hostname
      port: 80 # Port, optional
      externalpv: true # Needed when a second solar inverter is connected., This parameter is needed when the BatterX station is connected to another solar inverter. The total produced solar power can so be reported through one system. Further auxilary solar inverters do not need to be connected to evcc. (optional)
      capacity: 50 # Battery capacity (kWh), optional
      minsoc: 0 # Minimum charge (%), Lower limit as configured on the battery system. Used by optimizer. (optional)
      maxsoc: 100 # Maximum charge (%), Upper limit as configured on the battery system. Used by optimizer and, on some devices, for grid charging. (optional)
      maxchargepower: # Maximum charge power (W), Highest power the battery system can charge with. The optimizer plans with charging up to this power. Some devices also use it as grid charging power. (optional)
      maxdischargepower: # Maximum discharge power (W), Highest power the battery system can discharge with. The optimizer plans with discharging up to this power. Smart mode assumes the battery supplies at most this power to vehicle charging. (optional)