Anker SOLIX X1 Hybrid Inverter

← Solare, batteria domestica, rete, contatori

The Modbus TCP interface must be enabled in the Anker app. This configuration was tested with the Firmware Version 1.0.16.1. Older or newer Firmware Versions may use different register addresses and therefore deliver incorrect data.

Ambiti di utilizzo

Contatore di rete
Produzione solare
Batteria

Parametri

Nome	Descrizione	Valore	Livello
`id`	ID Modbus Predefinito: `1`	int	obbligatorio
`host`	Indirizzo IP o hostname Esempio: `192.0.2.2`		obbligatorio
`port`	Porta Predefinito: `502`	int	obbligatorio
`capacity` [kWh]	Battery capacity Esempio: `50`		facoltativo
`minsoc` [%]	Minimum charge Lower limit as configured on the battery system. Used by optimizer. Predefinito: `0` Esempio: `25`		facoltativo
`maxsoc` [%]	Maximum charge Upper limit as configured on the battery system. Used by optimizer and for grid charging. Predefinito: `100` Esempio: `95`		facoltativo
`maxacpower` [W]	Maximum AC power of the hybrid inverter Predefinito: `0` Esempio: `5000`		avanzato
`maxchargepower` [W]	Maximum charge power For forced charging of the battery.		avanzato
`maxdischargepower` [W]	Maximum discharge power Maximum discharge power of the storage.		avanzato

Esempio di configurazione per evcc.yaml

Se preferisci non configurare il dispositivo dall’interfaccia, puoi usare questo blocco YAML.

Contatore di reteProduzione solareBatteria

meters:
    - name: my_grid
      type: template
      template: anker-solix-x1
      usage: grid

      # Modbus TCP
      modbus: tcpip
      id: 1
      host:  # Hostname
      port: 502 # Port

meters:
    - name: my_pv
      type: template
      template: anker-solix-x1
      usage: pv

      # Modbus TCP
      modbus: tcpip
      id: 1
      host:  # Hostname
      port: 502 # Port
      maxacpower: 0 # Maximum AC power of the hybrid inverter (W), optional

meters:
    - name: my_battery
      type: template
      template: anker-solix-x1
      usage: battery

      # Modbus TCP
      modbus: tcpip
      id: 1
      host:  # Hostname
      port: 502 # Port
      capacity: 50 # Battery capacity (kWh), optional
      minsoc: 0 # Minimum charge (%), Lower limit as configured on the battery system. Used by optimizer. (optional)
      maxsoc: 100 # Maximum charge (%), Upper limit as configured on the battery system. Used by optimizer and for grid charging. (optional)
      maxchargepower: # Maximum charge power (W), For forced charging of the battery. (optional)
      maxdischargepower: # Maximum discharge power (W), Maximum discharge power of the storage. (optional)

Vedi la versione nightly