enecess ecoMain

← Solare, batteria domestica, rete, contatori

Questa pagina mostra la versione nightly. Passa alla versione release.

Grid metering uses the ecoMain main circuit; PV, charging, and auxiliary metering can use branch channels on the ecoMain or an ecoSub.

Requires ecoMain firmware 139 or later.

Ambiti di utilizzo

• Contatore di rete
• Produzione solare
• Contatore del caricabatterie
• Consumatore intelligente

Parametri

Nome	Descrizione	Valore	Livello
id	ID Modbus Predefinito: 1	int	obbligatorio
host	Indirizzo IP o hostname Esempio: 192.0.2.2		obbligatorio
port	Porta Predefinito: 502	int	obbligatorio
phasecount	Number of phases For single-phase metering, configure phase 1 only. For three-phase metering, also configure phases 2 and 3. Predefinito: 1	13	facoltativo
device1	Device (phase 1) Selects the device to which the CT for phase 1 is connected. 0 = ecoMain, 1–3 = ecoSub. Predefinito: 0	0123	facoltativo
channel1	Meter channel (phase 1) Selects the meter channel to which the CT for phase 1 is connected. Predefinito: 1	12345678910	facoltativo
invert1	Invert direction (phase 1) Enable if the power for phase 1 is measured with the opposite sign. Predefinito: false		facoltativo
device2	Device (phase 2) Only required for three-phase measurement. Selects the device to which the CT for phase 2 is connected. 0 = ecoMain, 1–3 = ecoSub. Esempio: 0	0123	facoltativo
channel2	Meter channel (phase 2) Only required for three-phase measurement. Selects the meter channel to which the CT for phase 2 is connected. Esempio: 2	12345678910	facoltativo
invert2	Invert direction (phase 2) Enable if the power for phase 2 is measured with the opposite sign. Predefinito: false		facoltativo
device3	Device (phase 3) Only required for three-phase measurement. Selects the device to which the CT for phase 3 is connected. 0 = ecoMain, 1–3 = ecoSub. Esempio: 0	0123	facoltativo
channel3	Meter channel (phase 3) Only required for three-phase measurement. Selects the meter channel to which the CT for phase 3 is connected. Esempio: 3	12345678910	facoltativo
invert3	Invert direction (phase 3) Enable if the power for phase 3 is measured with the opposite sign. Predefinito: false		facoltativo

Esempio di configurazione per evcc.yaml

Se preferisci non configurare il dispositivo dall’interfaccia, puoi usare questo blocco YAML.

Contatore di reteProduzione solareContatore del caricabatterieConsumatore intelligente

meters:
    - name: my_grid
      type: template
      template: enecess-ecomain
      usage: grid

      # Modbus TCP
      modbus: tcpip
      id: 255
      host:  # Hostname
      port: 502 # Port

meters:
    - name: my_pv
      type: template
      template: enecess-ecomain
      usage: pv

      # Modbus TCP
      modbus: tcpip
      id: 255
      host:  # Hostname
      port: 502 # Port
      phasecount: 1 # Number of phases, For single-phase metering, configure phase 1 only. For three-phase metering, also configure phases 2 and 3. [1, 3]
      device1: 0 # Device (phase 1), Selects the device to which the CT for phase 1 is connected. 0 = ecoMain, 1–3 = ecoSub. [0, 1, 2, 3]
      channel1: 1 # Meter channel (phase 1), Selects the meter channel to which the CT for phase 1 is connected. [1, 2, 3, 4, 5, 6, 7, 8, 9, 10]
      invert1: false # Invert direction (phase 1), Enable if the power for phase 1 is measured with the opposite sign. (optional)
      device2: 0 # Device (phase 2), Only required for three-phase measurement.  Selects the device to which the CT for phase 2 is connected. 0 = ecoMain, 1–3 = ecoSub. [0, 1, 2, 3] (optional)
      channel2: 2 # Meter channel (phase 2), Only required for three-phase measurement.  Selects the meter channel to which the CT for phase 2 is connected. [1, 2, 3, 4, 5, 6, 7, 8, 9, 10] (optional)
      invert2: false # Invert direction (phase 2), Enable if the power for phase 2 is measured with the opposite sign. (optional)
      device3: 0 # Device (phase 3), Only required for three-phase measurement.  Selects the device to which the CT for phase 3 is connected. 0 = ecoMain, 1–3 = ecoSub. [0, 1, 2, 3] (optional)
      channel3: 3 # Meter channel (phase 3), Only required for three-phase measurement.  Selects the meter channel to which the CT for phase 3 is connected. [1, 2, 3, 4, 5, 6, 7, 8, 9, 10] (optional)
      invert3: false # Invert direction (phase 3), Enable if the power for phase 3 is measured with the opposite sign. (optional)

meters:
    - name: my_charger
      type: template
      template: enecess-ecomain
      usage: charge

      # Modbus TCP
      modbus: tcpip
      id: 255
      host:  # Hostname
      port: 502 # Port
      phasecount: 1 # Number of phases, For single-phase metering, configure phase 1 only. For three-phase metering, also configure phases 2 and 3. [1, 3]
      device1: 0 # Device (phase 1), Selects the device to which the CT for phase 1 is connected. 0 = ecoMain, 1–3 = ecoSub. [0, 1, 2, 3]
      channel1: 1 # Meter channel (phase 1), Selects the meter channel to which the CT for phase 1 is connected. [1, 2, 3, 4, 5, 6, 7, 8, 9, 10]
      invert1: false # Invert direction (phase 1), Enable if the power for phase 1 is measured with the opposite sign. (optional)
      device2: 0 # Device (phase 2), Only required for three-phase measurement.  Selects the device to which the CT for phase 2 is connected. 0 = ecoMain, 1–3 = ecoSub. [0, 1, 2, 3] (optional)
      channel2: 2 # Meter channel (phase 2), Only required for three-phase measurement.  Selects the meter channel to which the CT for phase 2 is connected. [1, 2, 3, 4, 5, 6, 7, 8, 9, 10] (optional)
      invert2: false # Invert direction (phase 2), Enable if the power for phase 2 is measured with the opposite sign. (optional)
      device3: 0 # Device (phase 3), Only required for three-phase measurement.  Selects the device to which the CT for phase 3 is connected. 0 = ecoMain, 1–3 = ecoSub. [0, 1, 2, 3] (optional)
      channel3: 3 # Meter channel (phase 3), Only required for three-phase measurement.  Selects the meter channel to which the CT for phase 3 is connected. [1, 2, 3, 4, 5, 6, 7, 8, 9, 10] (optional)
      invert3: false # Invert direction (phase 3), Enable if the power for phase 3 is measured with the opposite sign. (optional)

meters:
    - name: my_aux
      type: template
      template: enecess-ecomain
      usage: aux

      # Modbus TCP
      modbus: tcpip
      id: 255
      host:  # Hostname
      port: 502 # Port
      phasecount: 1 # Number of phases, For single-phase metering, configure phase 1 only. For three-phase metering, also configure phases 2 and 3. [1, 3]
      device1: 0 # Device (phase 1), Selects the device to which the CT for phase 1 is connected. 0 = ecoMain, 1–3 = ecoSub. [0, 1, 2, 3]
      channel1: 1 # Meter channel (phase 1), Selects the meter channel to which the CT for phase 1 is connected. [1, 2, 3, 4, 5, 6, 7, 8, 9, 10]
      invert1: false # Invert direction (phase 1), Enable if the power for phase 1 is measured with the opposite sign. (optional)
      device2: 0 # Device (phase 2), Only required for three-phase measurement.  Selects the device to which the CT for phase 2 is connected. 0 = ecoMain, 1–3 = ecoSub. [0, 1, 2, 3] (optional)
      channel2: 2 # Meter channel (phase 2), Only required for three-phase measurement.  Selects the meter channel to which the CT for phase 2 is connected. [1, 2, 3, 4, 5, 6, 7, 8, 9, 10] (optional)
      invert2: false # Invert direction (phase 2), Enable if the power for phase 2 is measured with the opposite sign. (optional)
      device3: 0 # Device (phase 3), Only required for three-phase measurement.  Selects the device to which the CT for phase 3 is connected. 0 = ecoMain, 1–3 = ecoSub. [0, 1, 2, 3] (optional)
      channel3: 3 # Meter channel (phase 3), Only required for three-phase measurement.  Selects the meter channel to which the CT for phase 3 is connected. [1, 2, 3, 4, 5, 6, 7, 8, 9, 10] (optional)
      invert3: false # Invert direction (phase 3), Enable if the power for phase 3 is measured with the opposite sign. (optional)