Home Assistant

← Veicoli

Home Assistant instances in your network will be auto-discovered and suitable vehicle entities and services (e.g. sensor.*) will be suggested.

Parametri

Nome	Descrizione	Livello
`uri`	Home Assistant URI Esempio: `http://homeassistant.local:8123`	facoltativo
`soc`	State of charge [%] Entity ID for the vehicle's battery state of charge in percent Esempio: `sensor.vehicle_soc`	facoltativo
`title`	Title Will be displayed in the user interface	facoltativo
`capacity` [kWh]	Battery capacity Esempio: `50`	facoltativo
`range`	Remaining range [km] Entity ID for the vehicle's remaining range in kilometers Esempio: `sensor.vehicle_range`	facoltativo
`status`	Charging status Entity ID for charging status (A=disconnected, B=connected, C=charging) Esempio: `sensor.vehicle_charging`	facoltativo
`limitSoc`	Target state of charge [%] Entity ID for the vehicle's target state of charge in percent (`number` or `input_number` entity) Esempio: `number.vehicle_target_state_of_charge`	facoltativo
`odometer`	Odometer [km] Entity ID for the vehicle's odometer reading in kilometers Esempio: `sensor.vehicle_odometer`	facoltativo
`climater`	Climatisation active Entity ID for the vehicle's climatisation state (`binary_sensor` with `on`/`off` state) Esempio: `binary_sensor.vehicle_climater`	facoltativo
`start_charging`	Service to start charging Entity ID for a script or a switch that starts charging the vehicle. Only useful with the Vehicle API-only charger. If a switch is provided, Service to stop charging must be left empty. Esempio: `script.vehicle_start_charge; switch.vehicle_charger`	facoltativo
`stop_charging`	Service to stop charging Entity ID for a script that stops charging the vehicle. Only useful with the Vehicle API-only charger. Esempio: `script.vehicle_stop_charge`	facoltativo
`wakeup`	Service to wake up vehicle Entity ID for a script or a button that wakes up the vehicle Esempio: `script.vehicle_wakeup; button.wakeup_vehicle`	facoltativo
`setMaxCurrent`	Set charging current [A] Entity ID for setting the maximum charging current in amperes (`number` or `input_number` entity) Esempio: `number.vehicle_charging_current`	facoltativo
`icon`	Icon Will be displayed in the user interface Predefinito: `car`	avanzato
`phases`	Maximum number of phases Used to determine the minimum solar surplus and plan duration.	avanzato
`minCurrent` [A]	Minimum current The minimum current per connected phase that can be used Esempio: `6`	avanzato
`maxCurrent` [A]	Maximum current The maximum current per connected phase that can be used Esempio: `16`	avanzato
`maxPower` [W]	Maximum charging power hint Defines the maximum charging power of the vehicle. Helps improve charge plan accuracy when the vehicle typically uses less than the offered current or supports higher single-phase current compared to three-phase. The offered current of the loadpoint is not affected. Esempio: `10000`	avanzato
`identifiers`	RFID identification Used to assign the vehicle to a loadpoint via RFID card. The identifier is shown on the loadpoint. Copy the value from there. Learn more.	avanzato
`priority`	Priority Priority of the loadpoint or vehicle in relation to other loadpoints or vehicles for allocating surplus energy (higher values, higher priority).	avanzato
`insecure`	Accept self-signed certificates	avanzato
`statusA`	States for status A Comma-separated list of additional states meaning disconnected, see docs.evcc.io Esempio: `not_plugged, disconnected`	avanzato
`statusB`	States for status B Comma-separated list of additional states meaning connected, see docs.evcc.io Esempio: `charging_stopped, charging_completed`	avanzato
`statusC`	States for status C Comma-separated list of additional states meaning charging, see docs.evcc.io Esempio: `instant_charging, fast_charging`	avanzato
`coarsecurrent`	1A current control Vehicle supports 1A current steps only	avanzato
`streaming`	Supports streaming Streaming data is received asynchronously Predefinito: `true`	avanzato
`welcomecharge`	Charge on connection Charger will enable charging for short time when vehicle is connected, irrespective of configured charge mode. This is useful for vehicles that require power supply when connecting.	avanzato
`climaterdisabled`	Disable climater detection Ignore the vehicle's climater state for charge control, so charging stops at the SoC or energy limit even when the vehicle signals an active climater request.	avanzato
`autodetectdisabled`	Exclude from auto detection Ignore the vehicle for auto detection of connected vehicles	avanzato
`wakeupdisabled`	Disable wake-up calls Do not send wake-up calls to the vehicle or charger, useful for vehicles that refuse to charge after repeated wake-ups.	avanzato

Esempio di configurazione per evcc.yaml

Se preferisci non configurare il dispositivo dall’interfaccia, puoi usare questo blocco YAML.

vehicles:
    - name: my_car
      type: template
      template: homeassistant
      uri: http://homeassistant.local:8123 # Home Assistant URI
      soc: sensor.vehicle_soc # State of charge [%], Entity ID for the vehicle's battery state of charge in percent
      title: # Title, Will be displayed in the user interface (optional)
      capacity: 50 # Battery capacity (kWh), optional
      range: sensor.vehicle_range # Remaining range [km], Entity ID for the vehicle's remaining range in kilometers (optional)
      status: sensor.vehicle_charging # Charging status, Entity ID for charging status (A=disconnected, B=connected, C=charging) (optional)
      limitSoc: number.vehicle_target_state_of_charge # Target state of charge [%], Entity ID for the vehicle's target state of charge in percent (`number` or `input_number` entity) (optional)
      odometer: sensor.vehicle_odometer # Odometer [km], Entity ID for the vehicle's odometer reading in kilometers (optional)
      climater: binary_sensor.vehicle_climater # Climatisation active, Entity ID for the vehicle's climatisation state (`binary_sensor` with `on`/`off` state) (optional)
      start_charging: script.vehicle_start_charge; switch.vehicle_charger # Service to start charging, Entity ID for a script or a switch that starts charging the vehicle. Only useful with the [Vehicle API-only charger](https://docs.evcc.io/en/chargers/vehicle-api-only-charger). If a switch is provided, Service to stop charging must be left empty. (optional)
      stop_charging: script.vehicle_stop_charge # Service to stop charging, Entity ID for a script that stops charging the vehicle. Only useful with the [Vehicle API-only charger](https://docs.evcc.io/en/chargers/vehicle-api-only-charger). (optional)
      wakeup: script.vehicle_wakeup; button.wakeup_vehicle # Service to wake up vehicle, Entity ID for a script or a button that wakes up the vehicle (optional)
      setMaxCurrent: number.vehicle_charging_current # Set charging current [A], Entity ID for setting the maximum charging current in amperes (`number` or `input_number` entity) (optional)
      icon: car # Icon, Will be displayed in the user interface [car, bike, bus, moped, motorcycle, rocket, scooter, taxi, tractor, rickshaw, shuttle, van, airpurifier, battery, bulb, climate, coffeemaker, compute, cooking, cooler, desktop, device, dishwasher, dryer, floorlamp, generic, heater, heatexchange, heatpump, kettle, laundry, laundry2, machine, meter, microwave, pump, smartconsumer, tool, waterheater] (optional)
      phases: # Maximum number of phases, Used to determine the minimum solar surplus and plan duration. [1, 2, 3] (optional)
      minCurrent: 6 # Minimum current (A), The minimum current per connected phase that can be used (optional)
      maxCurrent: 16 # Maximum current (A), The maximum current per connected phase that can be used (optional)
      maxPower: 10000 # Maximum charging power hint (W), Defines the maximum charging power of the vehicle. Helps improve charge plan accuracy when the vehicle typically uses less than the offered current or supports higher single-phase current compared to three-phase. _The offered current of the loadpoint is not affected._ (optional)
      identifiers: # RFID identification, Used to assign the vehicle to a loadpoint via RFID card. The identifier is shown on the loadpoint. Copy the value from there. [Learn more.](https://docs.evcc.io/en/docs/features/vehicle) (optional)
      priority: # Priority, Priority of the loadpoint or vehicle in relation to other loadpoints or vehicles for allocating surplus energy (higher values, higher priority). (optional)
      insecure: # Accept self-signed certificates, optional
      statusA: not_plugged, disconnected # States for status A, Comma-separated list of additional states meaning disconnected, see [docs.evcc.io](https://docs.evcc.io/en/smarthome/home-assistant#charge-status) (optional)
      statusB: charging_stopped, charging_completed # States for status B, Comma-separated list of additional states meaning connected, see [docs.evcc.io](https://docs.evcc.io/en/smarthome/home-assistant#charge-status) (optional)
      statusC: instant_charging, fast_charging # States for status C, Comma-separated list of additional states meaning charging, see [docs.evcc.io](https://docs.evcc.io/en/smarthome/home-assistant#charge-status) (optional)
      coarsecurrent: # 1A current control, Vehicle supports 1A current steps only (optional)
      streaming: true # Supports streaming, Streaming data is received asynchronously (optional)
      welcomecharge: # Charge on connection, Charger will enable charging for short time when vehicle is connected, irrespective of configured charge mode. This is useful for vehicles that require power supply when connecting. (optional)
      climaterdisabled: # Disable climater detection, Ignore the vehicle's climater state for charge control, so charging stops at the SoC or energy limit even when the vehicle signals an active climater request. (optional)
      autodetectdisabled: # Exclude from auto detection, Ignore the vehicle for auto detection of connected vehicles (optional)
      wakeupdisabled: # Disable wake-up calls, Do not send wake-up calls to the vehicle or charger, useful for vehicles that refuse to charge after repeated wake-ups. (optional)