ISO15118

← Veicoli

Only supported if the vehicle can provide the state of charge (Soc) to the connected charger. Using ISO15118 with some VW group vehicles, e.g. Porsche Taycan, requires additional configuration in the vehicle. This requires an active location-based charging profile with the lowest minimum charge (25%) and direct charging disabled. Otherwise the vehicle cannot be put into sleep mode.

Funzionalità supportate

• ISO 15118-2: Plug & Charge (identificazione del veicolo, trasmissione del livello di carica).

Parametri

Nome	Descrizione	Valore	Livello
title	Title Will be displayed in the user interface		facoltativo
capacity [kWh]	Battery capacity Esempio: 50		facoltativo
icon	Icon Will be displayed in the user interface Predefinito: car	carbikebusmopedmotorcyclerocketscootertaxitractorrickshawshuttlevanairpurifierbatterybulbclimatecoffeemakercomputecookingcoolerdesktopdevicedishwasherdryerfloorlampgenericheaterheatexchangeheatpumpkettlelaundrylaundry2machinemetermicrowavepumpsmartconsumertoolwaterheater	avanzato
phases	Maximum number of phases Used to determine the minimum solar surplus and plan duration.	123	avanzato
minCurrent [A]	Minimum current The minimum current per connected phase that can be used Esempio: 6		avanzato
maxCurrent [A]	Maximum current The maximum current per connected phase that can be used Esempio: 16		avanzato
maxPower [W]	Maximum charging power hint Defines the maximum charging power of the vehicle. Helps improve charge plan accuracy when the vehicle typically uses less than the offered current or supports higher single-phase current compared to three-phase. The offered current of the loadpoint is not affected. Esempio: 10000		avanzato
identifiers	RFID identification Used to assign the vehicle to a loadpoint via RFID card. The identifier is shown on the loadpoint. Copy the value from there. Learn more.		avanzato
priority	Priority Priority of the loadpoint or vehicle in relation to other loadpoints or vehicles for allocating surplus energy (higher values, higher priority).		avanzato

Esempio di configurazione per evcc.yaml

Se preferisci non configurare il dispositivo dall’interfaccia, puoi usare questo blocco YAML.

vehicles:
    - name: my_car
      type: template
      template: iso15118
      title: # Title, Will be displayed in the user interface (optional)
      capacity: 50 # Battery capacity (kWh), optional
      icon: car # Icon, Will be displayed in the user interface [car, bike, bus, moped, motorcycle, rocket, scooter, taxi, tractor, rickshaw, shuttle, van, airpurifier, battery, bulb, climate, coffeemaker, compute, cooking, cooler, desktop, device, dishwasher, dryer, floorlamp, generic, heater, heatexchange, heatpump, kettle, laundry, laundry2, machine, meter, microwave, pump, smartconsumer, tool, waterheater] (optional)
      phases: # Maximum number of phases, Used to determine the minimum solar surplus and plan duration. [1, 2, 3] (optional)
      minCurrent: 6 # Minimum current (A), The minimum current per connected phase that can be used (optional)
      maxCurrent: 16 # Maximum current (A), The maximum current per connected phase that can be used (optional)
      maxPower: 10000 # Maximum charging power hint (W), Defines the maximum charging power of the vehicle. Helps improve charge plan accuracy when the vehicle typically uses less than the offered current or supports higher single-phase current compared to three-phase. _The offered current of the loadpoint is not affected._ (optional)
      identifiers: # RFID identification, Used to assign the vehicle to a loadpoint via RFID card. The identifier is shown on the loadpoint. Copy the value from there. [Learn more.](https://docs.evcc.io/en/docs/features/vehicle) (optional)
      priority: # Priority, Priority of the loadpoint or vehicle in relation to other loadpoints or vehicles for allocating surplus energy (higher values, higher priority). (optional)