Tibber

← Veicoli

Reads vehicle data (state of charge, range) via the official Tibber Data API. Requires an OAuth2 client (client id and secret) created at https://data-api.tibber.com/clients/manage. Register the redirect URI shown below when creating the client. A Tibber energy contract is not required, the vehicle must be connected in the Tibber account.

Parametri

Nome	Descrizione	Livello
`clientid`	Client ID	facoltativo
`clientsecret`	Client Secret	facoltativo
`redirecturi`	Redirect URI Redirect URI of the evcc instance. Must match the redirect URI set in the Tibber Data API client.	facoltativo
`title`	Title Will be displayed in the user interface	facoltativo
`capacity` [kWh]	Battery capacity Esempio: `50`	facoltativo
`vin`	Vehicle Identification Number Optional, selects the vehicle when the account has more than one. Esempio: `WVW...`	facoltativo
`icon`	Icon Will be displayed in the user interface Predefinito: `car`	avanzato
`phases`	Maximum number of phases Used to determine the minimum solar surplus and plan duration.	avanzato
`minCurrent` [A]	Minimum current The minimum current per connected phase that can be used Esempio: `6`	avanzato
`maxCurrent` [A]	Maximum current The maximum current per connected phase that can be used Esempio: `16`	avanzato
`maxPower` [W]	Maximum charging power hint Defines the maximum charging power of the vehicle. Helps improve charge plan accuracy when the vehicle typically uses less than the offered current or supports higher single-phase current compared to three-phase. The offered current of the loadpoint is not affected. Esempio: `10000`	avanzato
`identifiers`	RFID identification Used to assign the vehicle to a loadpoint via RFID card. The identifier is shown on the loadpoint. Copy the value from there. Learn more.	avanzato
`priority`	Priority Priority of the loadpoint or vehicle in relation to other loadpoints or vehicles for allocating surplus energy (higher values, higher priority).	avanzato
`climaterdisabled`	Disable climater detection Ignore the vehicle's climater state for charge control, so charging stops at the SoC or energy limit even when the vehicle signals an active climater request.	avanzato
`autodetectdisabled`	Exclude from auto detection Ignore the vehicle for auto detection of connected vehicles	avanzato
`wakeupdisabled`	Disable wake-up calls Do not send wake-up calls to the vehicle or charger, useful for vehicles that refuse to charge after repeated wake-ups.	avanzato
`welcomecharge`	Charge on connection Charger will enable charging for short time when vehicle is connected, irrespective of configured charge mode. This is useful for vehicles that require power supply when connecting.	avanzato
`cache`	Cache Time interval for data refresh Predefinito: `15m` Esempio: `5m`	avanzato

Esempio di configurazione per evcc.yaml

Se preferisci non configurare il dispositivo dall’interfaccia, puoi usare questo blocco YAML.

vehicles:
    - name: my_car
      type: template
      template: tibber
      clientid: # Client ID
      clientsecret: # Client Secret
      redirecturi: # Redirect URI, Redirect URI of the evcc instance. Must match the redirect URI set in the Tibber Data API client.
      title: # Title, Will be displayed in the user interface (optional)
      capacity: 50 # Battery capacity (kWh), optional
      vin: WVW... # Vehicle Identification Number, Optional, selects the vehicle when the account has more than one. (optional)
      icon: car # Icon, Will be displayed in the user interface [car, bike, bus, moped, motorcycle, rocket, scooter, taxi, tractor, rickshaw, shuttle, van, airpurifier, battery, bulb, climate, coffeemaker, compute, cooking, cooler, desktop, device, dishwasher, dryer, floorlamp, generic, heater, heatexchange, heatpump, kettle, laundry, laundry2, machine, meter, microwave, pump, smartconsumer, tool, waterheater] (optional)
      phases: # Maximum number of phases, Used to determine the minimum solar surplus and plan duration. [1, 2, 3] (optional)
      minCurrent: 6 # Minimum current (A), The minimum current per connected phase that can be used (optional)
      maxCurrent: 16 # Maximum current (A), The maximum current per connected phase that can be used (optional)
      maxPower: 10000 # Maximum charging power hint (W), Defines the maximum charging power of the vehicle. Helps improve charge plan accuracy when the vehicle typically uses less than the offered current or supports higher single-phase current compared to three-phase. _The offered current of the loadpoint is not affected._ (optional)
      identifiers: # RFID identification, Used to assign the vehicle to a loadpoint via RFID card. The identifier is shown on the loadpoint. Copy the value from there. [Learn more.](https://docs.evcc.io/en/docs/features/vehicle) (optional)
      priority: # Priority, Priority of the loadpoint or vehicle in relation to other loadpoints or vehicles for allocating surplus energy (higher values, higher priority). (optional)
      climaterdisabled: # Disable climater detection, Ignore the vehicle's climater state for charge control, so charging stops at the SoC or energy limit even when the vehicle signals an active climater request. (optional)
      autodetectdisabled: # Exclude from auto detection, Ignore the vehicle for auto detection of connected vehicles (optional)
      wakeupdisabled: # Disable wake-up calls, Do not send wake-up calls to the vehicle or charger, useful for vehicles that refuse to charge after repeated wake-ups. (optional)
      welcomecharge: # Charge on connection, Charger will enable charging for short time when vehicle is connected, irrespective of configured charge mode. This is useful for vehicles that require power supply when connecting. (optional)
      cache: 15m # Cache, Time interval for data refresh (optional)