KEBA KeContact P40

Following settings have to be enabled using the KEBA eMobility App:

Enable Modbus: The "Enable" and "Enable RFID" options must be activated in the "Modbus" settings.
To use RFID cards, the "Authorization" option must be activated under "Device".
For phase switching the minimum firmware version 1.3.0 must be installed. In the "Photovoltaic Optimized Charging" settings, the phase switching needs to be enabled. The "communication channel" must be set to "Modbus".

Understøttede funktioner

mA-regulering: Finere regulering af ladestrømmen (mA i stedet for A) for bedre udnyttelse af soloverskud.
RFID: Integreret RFID-kortlæser til identifikation af køretøjer.
1P/3P: Automatisk faseskift. Nyttigt til opladning med soloverskud.
Kan nedreguleres: Effektforbruget kan reduceres (f.eks. § 14a EnWG). Se Ekstern grænse.

Parametre

Navn	Beskrivelse	Værdi	Niveau
`id`	Modbus-ID Standard: `1`	int	påkrævet
`host`	IP-adresse eller værtsnavn Eksempel: `192.0.2.2`		påkrævet
`port`	Port Standard: `502`	int	påkrævet
`welcomecharge`	Charge on connection Charger will enable charging for short time when vehicle is connected, irrespective of configured charge mode. This is useful for vehicles that require power supply when connecting.		avanceret

Konfigurationseksempel til evcc.yaml

Hvis du ikke vil konfigurere via webgrænsefladen, kan du i stedet bruge denne YAML-blok.

chargers:
    - name: my_charger
      type: template
      template: keba-modbus-p40

      # Modbus TCP
      modbus: tcpip
      id: 255
      host:  # Hostname
      port: 502 # Port
      welcomecharge: # Charge on connection, Charger will enable charging for short time when vehicle is connected, irrespective of configured charge mode. This is useful for vehicles that require power supply when connecting. (optional)