INTILION scalebloc energy

← Sol, batteri, elnet, målere

The INTILION scalebloc communicates via Modbus TCP/IP. The Modbus interface must be enabled in the device. Default IP address: 192.168.2.2

Anvendelsesområder

• Elnetsmåler
• Batteri

Parametre

Navn	Beskrivelse	Værdi	Niveau
id	Modbus-ID Standard: 1	int	påkrævet
host	IP-adresse eller værtsnavn Eksempel: 192.0.2.2		påkrævet
port	Port Standard: 502	int	påkrævet
capacity [kWh]	Battery capacity Eksempel: 50		valgfri
minsoc [%]	Minimum charge Lower limit as configured on the battery system. Used by optimizer. Standard: 0 Eksempel: 25		valgfri
maxsoc [%]	Maximum charge Upper limit as configured on the battery system. Used by optimizer and for grid charging. Standard: 100 Eksempel: 95		valgfri
maxchargepower [W]	Maximum charge power For forced charging of the battery.		avanceret
maxdischargepower [W]	Maximum discharge power Maximum discharge power of the storage.		avanceret

Konfigurationseksempel til evcc.yaml

Hvis du ikke vil konfigurere via webgrænsefladen, kan du i stedet bruge denne YAML-blok.

ElnetsmålerBatteri

meters:
    - name: my_grid
      type: template
      template: intilion-scalebloc
      usage: grid

      # Modbus TCP
      modbus: tcpip
      id: 1
      host:  # Hostname
      port: 502 # Port

meters:
    - name: my_battery
      type: template
      template: intilion-scalebloc
      usage: battery

      # Modbus TCP
      modbus: tcpip
      id: 1
      host:  # Hostname
      port: 502 # Port
      capacity: 50 # Battery capacity (kWh), optional
      minsoc: 0 # Minimum charge (%), Lower limit as configured on the battery system. Used by optimizer. (optional)
      maxsoc: 100 # Maximum charge (%), Upper limit as configured on the battery system. Used by optimizer and for grid charging. (optional)
      maxchargepower: # Maximum charge power (W), For forced charging of the battery. (optional)
      maxdischargepower: # Maximum discharge power (W), Maximum discharge power of the storage. (optional)

Se nightly-versionen