Solax Hybrid-Inverter (Cloud)

The Solax hybrid inverter has to be registered in the SolaxCloud.

Attention: Values can only be fetched every 150s and then also can be 5 minutes old. Charging by PV will not be optimal because of this! Only use as fallback if no local access is available.

Anvendelsesområder

Elnetsmåler
Solproduktion
Batteri

Parametre

Navn	Beskrivelse	Niveau
`tokenid`	SolaxCloud TokenID solaxcloud.com -> Support -> Third-party Ecology (old site) or Service -> API (new site), enter the value of `tokenID` here (Example: 20241028488283838)	valgfri
`serial`	Serial number solaxcloud.com -> Device -> Inverter (new site) or Support (old site), use the registration number	valgfri
`capacity` [kWh]	Battery capacity Eksempel: `50`	valgfri
`minsoc` [%]	Minimum charge Lower limit as configured on the battery system. Used by optimizer. Standard: `0` Eksempel: `25`	valgfri
`maxsoc` [%]	Maximum charge Upper limit as configured on the battery system. Used by optimizer and for grid charging. Standard: `100` Eksempel: `95`	valgfri
`maxchargepower` [W]	Maximum charge power For forced charging of the battery.	avanceret
`maxdischargepower` [W]	Maximum discharge power Maximum discharge power of the storage.	avanceret
`cache`	Cache Time interval for data refresh Standard: `1s` Eksempel: `5m`	avanceret

Konfigurationseksempel til evcc.yaml

Hvis du ikke vil konfigurere via webgrænsefladen, kan du i stedet bruge denne YAML-blok.

ElnetsmålerSolproduktionBatteri

meters:
    - name: my_grid
      type: template
      template: solax-hybrid-cloud
      usage: grid
      tokenid: # SolaxCloud TokenID, [solaxcloud.com](https://www.solaxcloud.com/) -> Support -> Third-party Ecology (old site) or Service -> API (new site), enter the value of `tokenID` here (Example: 20241028488283838)
      serial: # Serial number, [solaxcloud.com](https://www.solaxcloud.com/) -> Device -> Inverter (new site) or Support (old site), use the registration number
      cache: 1s # Cache, Time interval for data refresh (optional)

meters:
    - name: my_pv
      type: template
      template: solax-hybrid-cloud
      usage: pv
      tokenid: # SolaxCloud TokenID, [solaxcloud.com](https://www.solaxcloud.com/) -> Support -> Third-party Ecology (old site) or Service -> API (new site), enter the value of `tokenID` here (Example: 20241028488283838)
      serial: # Serial number, [solaxcloud.com](https://www.solaxcloud.com/) -> Device -> Inverter (new site) or Support (old site), use the registration number
      cache: 1s # Cache, Time interval for data refresh (optional)

meters:
    - name: my_battery
      type: template
      template: solax-hybrid-cloud
      usage: battery
      tokenid: # SolaxCloud TokenID, [solaxcloud.com](https://www.solaxcloud.com/) -> Support -> Third-party Ecology (old site) or Service -> API (new site), enter the value of `tokenID` here (Example: 20241028488283838)
      serial: # Serial number, [solaxcloud.com](https://www.solaxcloud.com/) -> Device -> Inverter (new site) or Support (old site), use the registration number
      capacity: 50 # Battery capacity (kWh), optional
      minsoc: 0 # Minimum charge (%), Lower limit as configured on the battery system. Used by optimizer. (optional)
      maxsoc: 100 # Maximum charge (%), Upper limit as configured on the battery system. Used by optimizer and for grid charging. (optional)
      maxchargepower: # Maximum charge power (W), For forced charging of the battery. (optional)
      maxdischargepower: # Maximum discharge power (W), Maximum discharge power of the storage. (optional)
      cache: 1s # Cache, Time interval for data refresh (optional)

Se nightly-versionen