SunEnergyXT SunEnergyXT 500 / 500 PRO

← Sol, batteri, elnet, målere

The battery's local mode must be enabled in the manufacturer's app. Furthermore, the device's IP address must be set to a fixed, permanent IP address in the router. An external meter (e.g., Shelly) measuring the grid connection point must be connected to the battery via the manufacturer's app. It is required for the grid usage, and also for the battery usage, because the normal battery mode enables the device's zero feed-in regulation, which reads this meter.

Understøttede funktioner

• Batteristyring: Ekstern styring af opladning og afladning af hjemmebatteriet via evcc.

Anvendelsesområder

• Elnetsmåler
• Solproduktion
• Batteri

🐜 Kendte begrænsninger

Currently, each head storage must be individually added in EVCC. Connecting multiple head storages into one system has been announced by the manufacturer but is not yet implemented on the software side.

maxacpower and maxdischargepower are derived from the selected model when left empty. An explicitly configured value takes precedence and is not clamped to the model limit.

Parametre

Navn	Beskrivelse	Værdi	Niveau
model	Model standard for the SunEnergyXT 500, pro for the SunEnergyXT 500 PRO. Determines the maximum AC and discharge power (800 W resp. 2400 W).	standardpro	valgfri
host	IP address or hostname Eksempel: 192.0.2.2		valgfri
capacity [kWh]	Battery capacity Total storage capacity: head unit 5 kWh, each extension pack adds 5 kWh. So 5 (head unit only), 10 (+1 extension) or 15 (+2 extensions). The number of detected battery packs is reported in the ON field of /read. Standard: 5 Eksempel: 50		valgfri
minsoc [%]	Minimum charge Lower limit as configured on the battery system. Used by optimizer. Standard: 0 Eksempel: 25		valgfri
maxsoc [%]	Maximum charge Upper limit as configured on the battery system. Used by optimizer and for grid charging. Standard: 100 Eksempel: 95		valgfri
maxacpower [W]	Maximum AC power of the hybrid inverter Standard: 0 Eksempel: 5000		avanceret
maxchargepower [W]	Maximum charge power For forced charging of the battery. Standard: 2400		avanceret
maxdischargepower [W]	Maximum discharge power Maximum discharge power of the storage.		avanceret
cache	Cache Time interval for data refresh Standard: 2s Eksempel: 5m		avanceret
timeout	Timeout Standard: 10s Eksempel: 10s		avanceret

Konfigurationseksempel til evcc.yaml

Hvis du ikke vil konfigurere via webgrænsefladen, kan du i stedet bruge denne YAML-blok.

ElnetsmålerSolproduktionBatteri

meters:
    - name: my_grid
      type: template
      template: sunenergyxt-500
      usage: grid
      model: # Model, `standard` for the SunEnergyXT 500, `pro` for the SunEnergyXT 500 PRO. Determines the maximum AC and discharge power (800 W resp. 2400 W). [standard, pro]
      host: 192.0.2.2 # IP address or hostname
      cache: 2s # Cache, Time interval for data refresh (optional)
      timeout: 10s # Timeout, optional

meters:
    - name: my_pv
      type: template
      template: sunenergyxt-500
      usage: pv
      model: # Model, `standard` for the SunEnergyXT 500, `pro` for the SunEnergyXT 500 PRO. Determines the maximum AC and discharge power (800 W resp. 2400 W). [standard, pro]
      host: 192.0.2.2 # IP address or hostname
      maxacpower: 0 # Maximum AC power of the hybrid inverter (W), optional
      cache: 2s # Cache, Time interval for data refresh (optional)
      timeout: 10s # Timeout, optional

meters:
    - name: my_battery
      type: template
      template: sunenergyxt-500
      usage: battery
      model: # Model, `standard` for the SunEnergyXT 500, `pro` for the SunEnergyXT 500 PRO. Determines the maximum AC and discharge power (800 W resp. 2400 W). [standard, pro]
      host: 192.0.2.2 # IP address or hostname
      capacity: 5 # Battery capacity (kWh), Total storage capacity: head unit 5 kWh, each extension pack adds 5 kWh. So 5 (head unit only), 10 (+1 extension) or 15 (+2 extensions). The number of detected battery packs is reported in the `ON` field of `/read`. (optional)
      minsoc: 0 # Minimum charge (%), Lower limit as configured on the battery system. Used by optimizer. (optional)
      maxsoc: 100 # Maximum charge (%), Upper limit as configured on the battery system. Used by optimizer and for grid charging. (optional)
      maxchargepower: 2400 # Maximum charge power (W), For forced charging of the battery. (optional)
      maxdischargepower: # Maximum discharge power (W), Maximum discharge power of the storage. (optional)
      cache: 2s # Cache, Time interval for data refresh (optional)
      timeout: 10s # Timeout, optional

Se nightly-versionen