Home Assistant Charger

← Opladere Kræver ikke sponsortoken

Home Assistant instances in your network will be auto-discovered and suitable charger entities and services (e.g. sensor.*, switch.*, number.*) will be suggested.

Understøttede funktioner

Kan nedreguleres: Effektforbruget kan reduceres (f.eks. § 14a EnWG). Se Ekstern grænse.

Parametre

Navn	Beskrivelse	Niveau
`uri`	Home Assistant URI Eksempel: `http://homeassistant.local:8123`	valgfri
`status`	Charging status sensor Entity ID for charging status (A=ready, B=connected, C=charging) Eksempel: `sensor.charger_status`	valgfri
`enabled`	Enabled status sensor Entity ID for enabled state (`sensor`, `binary_sensor` or `switch` with `on`/`off` or `true`/`false` state) Eksempel: `binary_sensor.charger_enabled`	valgfri
`enable`	Enable switch Entity ID for enable/disable control (`switch` or `input_boolean`) Eksempel: `switch.charger_enable`	valgfri
`setMaxCurrent`	Maximum current entity [A] Entity ID for setting maximum current in amperes (`number` or `input_number` entity) Eksempel: `number.charger_max_current`	valgfri
`insecure`	Accept self-signed certificates	avanceret
`statusA`	States for status A Comma-separated list of additional states meaning ready, see docs.evcc.io Eksempel: `not_plugged, disconnected`	avanceret
`statusB`	States for status B Comma-separated list of additional states meaning connected, see docs.evcc.io Eksempel: `charging_stopped, charging_completed`	avanceret
`statusC`	States for status C Comma-separated list of additional states meaning charging, see docs.evcc.io Eksempel: `instant_charging, fast_charging`	avanceret
`milliamps`	0.1A current steps Enable if the maximum current entity accepts fractional amperes; otherwise evcc sends whole amperes only	avanceret
`power`	Power entity Entity ID for instantaneous power measurement in watts Eksempel: `sensor.charger_power`	avanceret
`energy`	Energy entity Entity ID for cumulative energy measurement in kWh Eksempel: `sensor.charger_energy`	avanceret
`identify`	Vehicle identification sensor Entity ID for the current RFID or vehicle identifier Eksempel: `sensor.charger_identify`	avanceret
`temp`	Temperature entity Entity ID for temperature measurement in °C (heating devices) Eksempel: `sensor.boiler_temperature`	avanceret
`currentL1`	L1 current entity Entity ID for L1 current measurement in amperes Eksempel: `sensor.charger_current_l1`	avanceret
`currentL2`	L2 current entity Entity ID for L2 current measurement in amperes Eksempel: `sensor.charger_current_l2`	avanceret
`currentL3`	L3 current entity Entity ID for L3 current measurement in amperes Eksempel: `sensor.charger_current_l3`	avanceret
`voltageL1`	L1 voltage entity Entity ID for L1 voltage measurement in volts Eksempel: `sensor.charger_voltage_l1`	avanceret
`voltageL2`	L2 voltage entity Entity ID for L2 voltage measurement in volts Eksempel: `sensor.charger_voltage_l2`	avanceret
`voltageL3`	L3 voltage entity Entity ID for L3 voltage measurement in volts Eksempel: `sensor.charger_voltage_l3`	avanceret
`phaseswitch`	Phase switching entity Entity ID for 1p/3p phase switching (select entity with options "1" and "3") Eksempel: `select.charger_phases`	avanceret
`heating`	Heating device Shows °C instead of %	avanceret
`integrateddevice`	Integrated device Integrated device. No charging sessions	avanceret

Konfigurationseksempel til evcc.yaml

Hvis du ikke vil konfigurere via webgrænsefladen, kan du i stedet bruge denne YAML-blok.

chargers:
    - name: my_charger
      type: template
      template: homeassistant
      uri: http://homeassistant.local:8123 # Home Assistant URI
      status: sensor.charger_status # Charging status sensor, Entity ID for charging status (A=ready, B=connected, C=charging)
      enabled: binary_sensor.charger_enabled # Enabled status sensor, Entity ID for enabled state (`sensor`, `binary_sensor` or `switch` with `on`/`off` or `true`/`false` state)
      enable: switch.charger_enable # Enable switch, Entity ID for enable/disable control (`switch` or `input_boolean`)
      setMaxCurrent: number.charger_max_current # Maximum current entity [A], Entity ID for setting maximum current in amperes (`number` or `input_number` entity)
      insecure: # Accept self-signed certificates, optional
      statusA: not_plugged, disconnected # States for status A, Comma-separated list of additional states meaning ready, see [docs.evcc.io](https://docs.evcc.io/en/smarthome/home-assistant#charge-status) (optional)
      statusB: charging_stopped, charging_completed # States for status B, Comma-separated list of additional states meaning connected, see [docs.evcc.io](https://docs.evcc.io/en/smarthome/home-assistant#charge-status) (optional)
      statusC: instant_charging, fast_charging # States for status C, Comma-separated list of additional states meaning charging, see [docs.evcc.io](https://docs.evcc.io/en/smarthome/home-assistant#charge-status) (optional)
      milliamps: # 0.1A current steps, Enable if the maximum current entity accepts fractional amperes; otherwise evcc sends whole amperes only (optional)
      power: sensor.charger_power # Power entity, Entity ID for instantaneous power measurement in watts (optional)
      energy: sensor.charger_energy # Energy entity, Entity ID for cumulative energy measurement in kWh (optional)
      identify: sensor.charger_identify # Vehicle identification sensor, Entity ID for the current RFID or vehicle identifier (optional)
      temp: sensor.boiler_temperature # Temperature entity, Entity ID for temperature measurement in °C (heating devices) (optional)
      currentL1: sensor.charger_current_l1 # L1 current entity, Entity ID for L1 current measurement in amperes (optional)
      currentL2: sensor.charger_current_l2 # L2 current entity, Entity ID for L2 current measurement in amperes (optional)
      currentL3: sensor.charger_current_l3 # L3 current entity, Entity ID for L3 current measurement in amperes (optional)
      voltageL1: sensor.charger_voltage_l1 # L1 voltage entity, Entity ID for L1 voltage measurement in volts (optional)
      voltageL2: sensor.charger_voltage_l2 # L2 voltage entity, Entity ID for L2 voltage measurement in volts (optional)
      voltageL3: sensor.charger_voltage_l3 # L3 voltage entity, Entity ID for L3 voltage measurement in volts (optional)
      phaseswitch: select.charger_phases # Phase switching entity, Entity ID for 1p/3p phase switching (select entity with options "1" and "3") (optional)
      heating: # Heating device, Shows °C instead of % (optional)
      integrateddevice: # Integrated device, Integrated device. No charging sessions (optional)