TinkerForge WARP1 Smart

← Opladere Kræver ikke sponsortoken

If necessary, WARP3's/WARP4's own automatic phase switching will be deactivated by EVCC when connecting to the wallbox (see docs.warp-charger.com). Phase switching (1p/3p) is only possible on the WARP2 with an additional WARP Energy Manager, and not possible at all on the WARP1, since it does not support CP separation. RFID on the WARP1 is only available if an NFC Bricklet has been retrofitted. On the WARP4, EVCC can identify the vehicle by its MAC address if "Autocharge" or "Read state of charge" is enabled in the wallbox's ISO 15118 settings. Reading the vehicle SoC via ISO 15118 requires "Read state of charge" and is only available on the WARP4 Pro, since it needs the built-in energy meter. The ISO 15118 features require WARP4 firmware 2.12.2 or later.

Understøttede funktioner

mA-regulering: Finere regulering af ladestrømmen (mA i stedet for A) for bedre udnyttelse af soloverskud.
Kan nedreguleres: Effektforbruget kan reduceres (f.eks. § 14a EnWG). Se Ekstern grænse.

Parametre

Navn	Beskrivelse	Niveau
`uri`	URI HTTP(S) address	valgfri
`user`	Username e.g. email address, user id, etc.	valgfri
`password`	Password Service account password	valgfri
`energyMeterIndex`	Energy Meter Index Index of the meter configured in the WARP charger whose values should be used. Standard: `0`	avanceret

Konfigurationseksempel til evcc.yaml

Hvis du ikke vil konfigurere via webgrænsefladen, kan du i stedet bruge denne YAML-blok.

chargers:
    - name: my_charger
      type: template
      template: tinkerforge-warp-ws
      uri: # URI, HTTP(S) address
      user: # Username, e.g. email address, user id, etc. (optional)
      password: # Password, Service account password (optional)
      energyMeterIndex: 0 # Energy Meter Index, Index of the meter configured in the WARP charger whose values should be used. (optional)