Shelly Plus i4 DC
Connect the relay contacts of the control box to the inputs SW1 to SW4. All used inputs must be configured as input type "switch" in the Shelly app or web interface, not as "button".
Parametre
| Navn | Beskrivelse | Værdi | Niveau |
|---|---|---|---|
host | IP address or hostname | valgfri | |
maxconsumptionpower [W] | Guaranteed minimum power (Pmin) Power limit applied to the root circuit while the limit is active. | valgfri | |
w4input | W4 input Input number for the W4 signal (Dimmer for controllable loads), 1 to 4 (SW1 = 1) | valgfri | |
w3input | W3 input Input number for the W3 signal (Zero export, 0%), 1 to 4 (SW1 = 1) | valgfri | |
password | Password Only required if authentication is enabled on the device (user is always admin) | valgfri | |
productionnominalmax [Wp] | Installed generator power Rated generator/module power of the installation (reference value according to § 9 EEG). | valgfri | |
s1input | S1 input Input number for the S1 signal (60% export power limit), 1 to 4 (SW1 = 1) | valgfri | |
s2input | S2 input Input number for the S2 signal (30% export power limit), 1 to 4 (SW1 = 1) | valgfri |
Konfigurationseksempel til evcc.yaml
Hvis du ikke vil konfigurere via webgrænsefladen, kan du i stedet bruge denne YAML-blok.
hems: type: template template: fnn-shelly-i4 host: 192.0.2.2 # IP address or hostname maxconsumptionpower: # Guaranteed minimum power (Pmin) (W), Power limit applied to the root circuit while the limit is active. w4input: 1 # W4 input, Input number for the W4 signal (Dimmer for controllable loads), 1 to 4 (SW1 = 1) w3input: 2 # W3 input, Input number for the W3 signal (Zero export, 0%), 1 to 4 (SW1 = 1) password: # Password, Only required if authentication is enabled on the device (user is always admin) (optional) productionnominalmax: # Installed generator power (Wp), Rated generator/module power of the installation (reference value according to § 9 EEG). (optional) s1input: 3 # S1 input, Input number for the S1 signal (60% export power limit), 1 to 4 (SW1 = 1) (optional) s2input: 4 # S2 input, Input number for the S2 signal (30% export power limit), 1 to 4 (SW1 = 1) (optional)