Atmoce MG100 M-gateway

← Sol, batteri, elnet, målere

Support for Atmoce MG100 (included with MC100 and MC100-T). Requires installer to enable Modbus TCP in configuration or through Atmozen app; available in firmware 01.01.00.18.10 or later. 'Grid Recharging' and 'Export Power' must be enabled in the Atmozen app to allow battery (dis)charging to/from grid.

Understøttede funktioner

Batteristyring: Ekstern styring af opladning og afladning af hjemmebatteriet via evcc.
Kan begrænses: Inverterens produktion kan reduceres (f.eks. § 9 EEG). Se Ekstern grænse.
Kan nedreguleres: Effektforbruget kan reduceres (f.eks. § 14a EnWG). Se Ekstern grænse.

Anvendelsesområder

Elnetsmåler
Solproduktion
Batteri

Parametre

Navn	Beskrivelse	Værdi	Niveau
`id`	Modbus-ID Standard: `1`	int	påkrævet
`host`	IP-adresse eller værtsnavn Eksempel: `192.0.2.2`		påkrævet
`port`	Port Standard: `502`	int	påkrævet
`firmware`	Firmware version Firmware 01.01.00.28.15 and higher allows for correct hold/holdcharge functionality, dimming and curtailing. Older versions only support hold function without (dis)charge. Standard: `<01.01.00.28.15`		valgfri
`maxacpower` [W]	Maximum AC power of the hybrid inverter Standard: `0` Eksempel: `5000`		avanceret
`minsoc` [%]	Minimum charge Lower limit as configured on the battery system. Used by optimizer. Standard: `10` Eksempel: `25`		avanceret
`maxsoc` [%]	Maximum charge Upper limit as configured on the battery system. Used by optimizer and, on some devices, for grid charging. Standard: `100` Eksempel: `95`		avanceret

Konfigurationseksempel til evcc.yaml

Hvis du ikke vil konfigurere via webgrænsefladen, kan du i stedet bruge denne YAML-blok.

ElnetsmålerSolproduktionBatteri

meters:
    - name: my_grid
      type: template
      template: atmoce
      usage: grid

      # Modbus TCP
      modbus: tcpip
      id: 1
      host:  # Hostname
      port: 502 # Port
      firmware: <01.01.00.28.15 # Firmware version, Firmware 01.01.00.28.15 and higher allows for correct hold/holdcharge functionality, dimming and curtailing. Older versions only support hold function without (dis)charge. [<01.01.00.28.15, >=01.01.00.28.15]

meters:
    - name: my_pv
      type: template
      template: atmoce
      usage: pv

      # Modbus TCP
      modbus: tcpip
      id: 1
      host:  # Hostname
      port: 502 # Port
      firmware: <01.01.00.28.15 # Firmware version, Firmware 01.01.00.28.15 and higher allows for correct hold/holdcharge functionality, dimming and curtailing. Older versions only support hold function without (dis)charge. [<01.01.00.28.15, >=01.01.00.28.15]
      maxacpower: 0 # Maximum AC power of the hybrid inverter (W), optional

meters:
    - name: my_battery
      type: template
      template: atmoce
      usage: battery

      # Modbus TCP
      modbus: tcpip
      id: 1
      host:  # Hostname
      port: 502 # Port
      firmware: <01.01.00.28.15 # Firmware version, Firmware 01.01.00.28.15 and higher allows for correct hold/holdcharge functionality, dimming and curtailing. Older versions only support hold function without (dis)charge. [<01.01.00.28.15, >=01.01.00.28.15]
      minsoc: 10 # Minimum charge (%), Lower limit as configured on the battery system. Used by optimizer. (optional)
      maxsoc: 100 # Maximum charge (%), Upper limit as configured on the battery system. Used by optimizer and, on some devices, for grid charging. (optional)